Differences between revisions 1 and 28 (spanning 27 versions)

OSX 64-bit

Building Python 2.5.2 on OSX

/configure --prefix=/Users/mabshoff/python-2.5.2-64 --with-gcc="gcc -m64" --enable-toolbox-glue=false

make && make install works, but there are various error message from gcc since it fails to build the toolbox glue on OSX, despite the above command disabling it.

Build Order of packages for 2.10.alpha2

dir-0.1 - sources !solve!
prereq-0.3 - sources !solve!
sage_scripts-2.10.alpha2 - sources !solve!
bzip2-1.0.4 - 32 bit enough? !solve!
conway_polynomials-0.2 - database? !solve!
gmp-4.2.1.p12 - must be 64 bit !solve!
termcap-1.3.1 - must be 64 bit !solve!
readline-5.2.p0 - must be 64 bit !solve!
pari-2.3.3 - must be 64 bit !solve!
ntl-5.4.1.p10 - must be 64 bit !solve!
cremona-20071219.p1 - must be 64 bit !solve!
graphs-20070722 - sources? !solve!
elliptic_curves-0.1 - don't know !solve!
extcode-2.10.alpha2 - sources? !solve!
flint-1.05 - must be 64 bit !solve!
zlib-1.2.3.p3 - must be 64 bit !solve!
sqlite-3.5.3.p1 - must be 64 bit !solve!
libgpg_error-1.5 - must be 64 bit !solve!
libgcrypt-1.2.4 - must be 64 bit !solve!
opencdk-0.5.9 - must be 64 bit !solve!
gnutls-1.6.3 - must be 64 bit !solve!
libpng-1.2.22.p3 - must be 64 bit !solve!
python-2.5.1.p11 - must be 64 bit - see above
freetype-2.3.5 - must be 64 bit
gd-2.0.33.p5 - must be 64 bit - distutils (partially?)
gdmodule-0.56.p4 - must be 64 bit - distutils
fortran-20071120.p3 - must be 64 bit - build gcc 4.2.2 gfortran from source
lapack-20071123.p0 - must be 64 bit
atlas-3.8.p7 - skipped anyway
gsl-1.9 - must be 64 bit
iml-1.0.1.p8 - must be 64 bit
ipython-0.8.1.p1 - python? - distutils?
givaro-3.2.6.p5 - must be 64 bit
linbox-20070915.p3 - must be 64 bit
f2c-20070816 - must be 64 bit
blas-20070724 - must be 64 bit
numpy-20080104-1.0.4.p1 - must be 64 bit - distutils
matplotlib-0.91.1.p1 - must be 64 bit - distutils
mercurial-0.9.5.p0 - must be 64 bit
mpfr-2.3.0.p0 - integarted into mpfr-2.3.0.p1
pexpect-2.0.p1 - must be 64 bit - distutils
mpfi-1.3.4-cvs20071125.p4 - must be 64 bit
pycrypto-2.0.1.p1 - python - distutils
cython-0.9.6.9 - python - distutils
sympy-0.5.7 - python - distutils
zodb3-3.7.0 - python only? - distutils
networkx-0.35.1 - pure python - distutils
quaddouble-2.2.p7 - must be 64 bit
python_gnutls-1.1.1 - python - distutils
twistedweb2-20070619 - python only? - distutils
twisted-2.5.0.p8 - python only? - distutils
singular-3-0-4-1-20071209.p3 - must be 64 bit
scons-0.97 - python only - distutils
symmetrica-2.0.p0 - must be 64 bit
libfplll-2.1.6-20071129 - must be 64 bit
polybori-0.1-r6 - must be 64 bit
rpy-1.0.1.p0 - must be 64 bit
r-2.6.1.p7 - must be 64 bit
rubiks-20070912.p0 - must be 64 bit
libm4ri-20071224 - must be 64 bit
sage-2.10.alpha2 - must be 64 bit
doc-2.10.alpha2 - doc
examples-2.10.alpha2 - doc
gap-4.4.10.p0 - 32 bit enough for now
clisp-2.41.p12 - 32 bit enough for now
maxima-5.13.0.p2 - 32 bit enough for now
genus2reduction-0.3 - depends on libpari, so needs to be 64 bits
lcalc-20070107.p0 - depends on libpari, so needs to be 64 bits
sympow-1.018.1.p3 - 32 bit enough for now
cddlib-094b.p0 - 32 bit enough for now
gfan-0.2.2.p2 - 32 bit enough for now
ecm-6.1.3 - 32 bit enough for now
tachyon-0.98beta.p3 - 32 bit enough for now
weave-0.4.9 - 32 bit enough for now
flintqs-20070817.p1 - 32 bit enough for now
palp-1.1 - 32 bit enough for now
moin-1.5.7.p2 - python
ipython1-20070130 - python
scipy-20071020-0.6.p2 - python only?
scipy_sandbox-20071020 - python only?
cvxopt-0.9.p5 - no clue
jmol-11.5.2 - java

Build Notes

Sage 2.10.alpha2 port to 64 bit OSX:

prereq-0.3

This is now #3172

gmp-4.2.1.p12

broken, need to update to 4.2.2, skip patching
add ABI=64, otherwise set ABI=32
Maybe: Our gmp 4.2.1 is FUBAR, i.e. Cygwin problems
Important: add extern __inline__ gmp-h.in fix for Darwin

termcap-1.3.1

This is now #3171

readline-5.2.p0

This is now #3170

eclib-20080310.p1

This is now #3173

flint-1.05

spkg-install:

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   FLINT_TUNE=" -fPIC -m64"
fi

In the dylib Darwin case:

    if ["$SAGE64" = "yes" ]; then
       $MAKE libflint.dylib64
    else
       $MAKE libflint.dylib
    fi

in src/makefile add

libflint.dylib64: $(FLINTOBJ)
        $(CC) -m64 -single_module -fPIC -dynamiclib -o libflint.dylib $(FLINTOBJ) $(LIBS)

spkg-check:

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   FLINT_TUNE=" -fPIC -m64"
fi

zlib-1.2.3.p3

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   CFLAGS=" -m64 $CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
else
   CFLAGS="$CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
fi
export CFLAGS

sqlite-3.5.3.p1

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi

plibgpg_error-1.5

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi

libgcrypt-1.2.4

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi

opencdk-0.5.9

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi

gnutls-1.6.3

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi

libpng-1.2.22.p3

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   CFLAGS=" -m64 $CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
else
   CFLAGS="$CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
fi
export CFLAGS

Note: gd-2.0.35 requires a dynamic libpng12.dylib

freetype-2.3.5

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi

gd-2.0.33.p5

Update to 2.0.35

# needed to pick up zlib.h
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   CFLAGS=" -m64 $CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\" -I$SAGE_LOCAL/include/freetype2/"
else
   CFLAGS="$CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\" -I$SAGE_LOCAL/include/freetype2/"
fi
export CFLAGS

Makefile.am: add "-m64"

fortran-20071120.p3

gfortran 4.2.2 compiled from scratch.

Add "-m64" to sage_fortran options, link x86_64 libgfortran.dylib

iml-1.0.1.p8

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CPPFLAGS="-O2 -g -m64 "; export CPPFLAGS
fi

linbox-20070915.p3

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
   CPPFLAGS="-O2 -g -m64 "; export CPPFLAGS
fi

f2c-20070816

uncomment "CFLAGS = -O" in f2c/makefile uncomment "CFLAGS = -O -fPIC" in libf2c/makefile

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "
else
   CFLAGS="-fPIC"
fi

Dual architecture static lib is created, but f2c works

mpfi

if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
   CPPFLAGS="-O2 -g -m64 "; export CPPFLAGS
fi

quaddouble-2.2.p7

CXXFLAGS='-fPIC -O3 -Dx86 -m64'
export CXXFLAGS

twisted-2.5.0.p8

depends on pymactoolbox.h?

gcc -fno-strict-aliasing -Wno-long-double -no-cpp-precomp -mno-fused-madd -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -m64 -I/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5 -c twisted/internet/cfsupport/cfsupport.c -o build/temp.macosx-10.3-i386-2.5/twisted/internet/cfsupport/cfsupport.o -w
In file included from twisted/internet/cfsupport/cfsupport.c:8:
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:138: error: syntax error before ‘Track’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:140: error: syntax error before ‘Movie’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:142: error: syntax error before ‘MovieController’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:146: error: syntax error before ‘UserData’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:148: error: syntax error before ‘Media’
error: command 'gcc' failed with exit status 1
Error: Subprocess exited with result 1 for project core
Error installing Twisted networking framework

real    0m5.832s
user    0m1.288s
sys     0m0.744s
sage: An error occurred while installing twisted-2.5.0.p8
Please email sage-devel http://groups.google.com/group/sage-devel
explaining the problem and send the relevant part of
of /Users/mabshoff/sage-2.10.alpha2/install.log.  Describe your computer, operating system, etc.
If you want to try to fix the problem, yourself *don't* just cd to
/Users/mabshoff/sage-2.10.alpha2/spkg/build/twisted-2.5.0.p8 and type 'make'.
Instead type "/Users/mabshoff/sage-2.10.alpha2/sage -sh"
in order to set all environment variables correctly, then cd to
/Users/mabshoff/sage-2.10.alpha2/spkg/build/twisted-2.5.0.p8
(When you are done debugging, you can type "exit" to leave the
subshell.)
make[1]: *** [installed/twisted-2.5.0.p8] Error 1

singular-3-0-4-1-20071209.p3

CXXFLAGS="$CXXFLAGS -fPIC -O3 -g -m64"; export CXXFLAGS
CFLAGS="$CFLAGS -fPIC -O3 -g -m64"; export CFLAGS
CPPFLAGS="$CXXFLAGS -fPIC -O3 -g -m64"; export CPPFLAGS

polybori

64 bit MacIntel
Starting build...
Running build_polybori...
scons: Reading SConscript files ...
KeyError: 'PYTHONHOME':
  File "/Users/mabshoff/sage-2.10.alpha2/spkg/standard/polybori-0.1-r6/src/PolyBoRi-0.1/SConstruct", line 105:
    env=Environment(ENV = {'PATH': os.environ['PATH']}, options=opts,tools = tools, toolpath = '.')
  File "/Users/mabshoff/sage-2.10.alpha2/local/lib/scons-0.97/SCons/Environment.py", line 779:
    options.Update(self)
  File "/Users/mabshoff/sage-2.10.alpha2/local/lib/scons-0.97/SCons/Options/__init__.py", line 145:
    execfile(filename, values)
  File "custom.py", line 13:
    PYPREFIX=os.environ['PYTHONHOME']
  File "/Users/mabshoff/sage-2.10.alpha2/local/lib/python2.5/UserDict.py", line 22:
    raise KeyError(key)
Error building PolyBoRi.

== sagelib== sage -b: devel/sage/c_lib/SConstruct

## We want the debug and optimization flags, since debug symbols are so useful, etc.
env.Append( CFLAGS="-O2 -g -m64" )
env.Append( CXXFLAGS="-O2 -g -m64" )

libm4fri

CFLAGS="$CFLAGS -fPIC $INCLUDES -L$SAGE_LOCAL/lib -m64"
CXXFLAGS="$CXXFLAGS -fPIC $INCLUDES -L$SAGE_LOCAL/lib -m64"
CPPFLAGS="$INCLUDES -m64"

numpy, scipy & friends

With Python 2.5.2. compiler with --with-gcc="gcc -m64" numpy builds fine. More investigation is needed here.

Done (incomplete list)

givaro-3.2.6.p10
gsl-1.10
libfplll
mpfr-2.3.0.p0
ntl-5.4.2
symmetrica-2.0.p2
pari-2.3.3

-  ⇤ ← Revision 1 as of 2007-11-22 05:02:41 → 
  Size: 1587
  Editor: was
  Comment:
+   ← Revision 28 as of 2008-05-13 00:23:55 → ⇥
  Size: 12079
  Editor: MichaelAbshoff
  Comment: eclib-20080310.p1 update
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
- * export CFLAGS="-arch x86_64"

 * building python {{{
For some pointers on how to get python to build in 64 bit mode see

http://mail.python.org/pipermail/pythonmac-sig/2007-June/019045.html

To quote (which is actually about 64 bit on *Tiger*):

<quote>
The build is universal, but for me only one of the two archictures
actually worked: I did my build on an Intel system and the 64-bit
build worked on that machine, but didn't work on a G5 mac. That's
probably something shallow, but as that machine doesn't have the
Xcode installed and is on the other side of a slow network connection
I haven't tried to debug this yet.

1) Edit the configure script, look for "-arch i386" and "-arch ppc"
and change that those to  "-arch ppc64" and "-arch x86_64". You'll
have to make multiple changes to the configure file.

2) Build using:

       $ mkdir build
       $ cd build
       $ CFLAGS="-arch ppc64 -arch x86_64" ../configure \
           --enable-universalsdk \
           --disable-toolbox-glue --prefix=/opt/python25-64bit
       $ make
       $ make install

3) Optionally: run "make testall" to run the unittests and check
pyconfig.h to check the various SIZEOF definitions.

You now have a 64-bit build of python in /opt/python25-64bit.
}}}


 * Cython {{{ 20:58 < mabshoff> There is also a bug in the way Cython builds its extensions.
20:58 < mabshoff> It needs to use the flags python was build with, not some random stuff people thing 
20:58 < mabshoff> think is good.
20:58 < mabshoff> I told Robert about it.
}}}
+= Building Python 2.5.2 on OSX =

  ./configure --prefix=/Users/mabshoff/python-2.5.2-64 --with-gcc="gcc -m64" --enable-toolbox-glue=false                      

make && make install works, but there are various error message from gcc since it fails to build the toolbox glue on OSX, despite the above command disabling it.

= Build Order of packages for 2.10.alpha2 =

 * dir-0.1 - sources !solve!
 * prereq-0.3 - sources !solve!
 * sage_scripts-2.10.alpha2 - sources !solve!
 * bzip2-1.0.4 - 32 bit enough? !solve!
 * conway_polynomials-0.2 - database? !solve!
 * gmp-4.2.1.p12 - must be 64 bit !solve!
 * termcap-1.3.1 - must be 64 bit !solve!
 * readline-5.2.p0 - must be 64 bit !solve!
 * pari-2.3.3 - must be 64 bit !solve!
 * ntl-5.4.1.p10 - must be 64 bit !solve!
 * cremona-20071219.p1 - must be 64 bit !solve!
 * graphs-20070722 - sources? !solve!
 * elliptic_curves-0.1 - don't know !solve!
 * extcode-2.10.alpha2 - sources? !solve!
 * flint-1.05 - must be 64 bit !solve!
 * zlib-1.2.3.p3 - must be 64 bit !solve!
 * sqlite-3.5.3.p1 - must be 64 bit !solve!
 * libgpg_error-1.5 - must be 64 bit !solve!
 * libgcrypt-1.2.4 - must be 64 bit !solve!
 * opencdk-0.5.9 - must be 64 bit !solve!
 * gnutls-1.6.3 - must be 64 bit !solve!
 * libpng-1.2.22.p3 - must be 64 bit !solve!
 * python-2.5.1.p11 - must be 64 bit - see above
 * freetype-2.3.5 - must be 64 bit
 * gd-2.0.33.p5 - must be 64 bit - distutils (partially?)
 * gdmodule-0.56.p4 - must be 64 bit - distutils
 * fortran-20071120.p3 - must be 64 bit - build gcc 4.2.2 gfortran from source
 * lapack-20071123.p0 - must be 64 bit
 * atlas-3.8.p7 - skipped anyway
 * gsl-1.9 - must be 64 bit
 * iml-1.0.1.p8 - must be 64 bit
 * ipython-0.8.1.p1 - python? - distutils?
 * givaro-3.2.6.p5 - must be 64 bit
 * linbox-20070915.p3 - must be 64 bit
 * f2c-20070816 - must be 64 bit
 * blas-20070724 - must be 64 bit
 * numpy-20080104-1.0.4.p1 - must be 64 bit - distutils
 * matplotlib-0.91.1.p1 - must be 64 bit - distutils
 * mercurial-0.9.5.p0 - must be 64 bit
 * mpfr-2.3.0.p0 - integarted into mpfr-2.3.0.p1
 * pexpect-2.0.p1 - must be 64 bit - distutils
 * mpfi-1.3.4-cvs20071125.p4 - must be 64 bit
 * pycrypto-2.0.1.p1 - python - distutils
 * cython-0.9.6.9 - python - distutils
 * sympy-0.5.7 - python - distutils
 * zodb3-3.7.0 - python only? - distutils
 * networkx-0.35.1 - pure python - distutils
 * quaddouble-2.2.p7 - must be 64 bit
 * python_gnutls-1.1.1 - python - distutils
 * twistedweb2-20070619 - python only? - distutils
 * twisted-2.5.0.p8 - python only? - distutils
 * singular-3-0-4-1-20071209.p3 - must be 64 bit
 * scons-0.97 - python only - distutils
 * symmetrica-2.0.p0 - must be 64 bit
 * libfplll-2.1.6-20071129 - must be 64 bit
 * polybori-0.1-r6 - must be 64 bit
 * rpy-1.0.1.p0 - must be 64 bit
 * r-2.6.1.p7 - must be 64 bit
 * rubiks-20070912.p0 - must be 64 bit
 * libm4ri-20071224 - must be 64 bit
 * sage-2.10.alpha2 - must be 64 bit
 * doc-2.10.alpha2 - doc
 * examples-2.10.alpha2 - doc
 * gap-4.4.10.p0 - 32 bit enough for now
 * clisp-2.41.p12 - 32 bit enough for now
 * maxima-5.13.0.p2 - 32 bit enough for now
 * genus2reduction-0.3 - depends on libpari, so needs to be 64 bits 
 * lcalc-20070107.p0 - depends on libpari, so needs to be 64 bits 
 * sympow-1.018.1.p3 - 32 bit enough for now
 * cddlib-094b.p0 - 32 bit enough for now
 * gfan-0.2.2.p2 - 32 bit enough for now
 * ecm-6.1.3 - 32 bit enough for now
 * tachyon-0.98beta.p3 - 32 bit enough for now
 * weave-0.4.9 - 32 bit enough for now
 * flintqs-20070817.p1 - 32 bit enough for now
 * palp-1.1 - 32 bit enough for now
 * moin-1.5.7.p2 - python
 * ipython1-20070130 - python
 * scipy-20071020-0.6.p2 - python only?
 * scipy_sandbox-20071020 - python only?
 * cvxopt-0.9.p5 - no clue
 * jmol-11.5.2 - java


= Build Notes =
Sage 2.10.alpha2 port to 64 bit OSX:

== prereq-0.3 ==
This is now #3172

== gmp-4.2.1.p12 ==

{{{
broken, need to update to 4.2.2, skip patching
add ABI=64, otherwise set ABI=32
Maybe: Our gmp 4.2.1 is FUBAR, i.e. Cygwin problems
Important: add extern __inline__ gmp-h.in fix for Darwin
}}}

== termcap-1.3.1 ==
This is now #3171

== readline-5.2.p0 ==
This is now #3170

== eclib-20080310.p1 ==
This is now #3173

== flint-1.05 ==

spkg-install:
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   FLINT_TUNE=" -fPIC -m64"
fi
}}}
In the dylib Darwin case:
{{{
    if ["$SAGE64" = "yes" ]; then
       $MAKE libflint.dylib64
    else
       $MAKE libflint.dylib
    fi
}}}
in src/makefile add
{{{
libflint.dylib64: $(FLINTOBJ)
        $(CC) -m64 -single_module -fPIC -dynamiclib -o libflint.dylib $(FLINTOBJ) $(LIBS)
}}}
spkg-check:
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   FLINT_TUNE=" -fPIC -m64"
fi
}}}

== zlib-1.2.3.p3 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   CFLAGS=" -m64 $CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
else
   CFLAGS="$CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
fi
export CFLAGS
}}}

== sqlite-3.5.3.p1 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi
}}}

== plibgpg_error-1.5 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi
}}}

== libgcrypt-1.2.4 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi
}}}

== opencdk-0.5.9 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi
}}}

== gnutls-1.6.3 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi
}}}

== libpng-1.2.22.p3 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   CFLAGS=" -m64 $CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
else
   CFLAGS="$CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\""
fi
export CFLAGS
}}}
Note: gd-2.0.35 requires a dynamic libpng12.dylib

== freetype-2.3.5 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
fi
}}}

== gd-2.0.33.p5 ==

Update to 2.0.35
{{{
# needed to pick up zlib.h
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   CFLAGS=" -m64 $CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\" -I$SAGE_LOCAL/include/freetype2/"
else
   CFLAGS="$CFLAGS -fPIC -g -I\"$SAGE_LOCAL/include\" -I$SAGE_LOCAL/include/freetype2/"
fi
export CFLAGS
}}}
Makefile.am: add "-m64"

== fortran-20071120.p3 ==

gfortran 4.2.2 compiled from scratch.

Add "-m64" to sage_fortran options, link x86_64 libgfortran.dylib

== iml-1.0.1.p8 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CPPFLAGS="-O2 -g -m64 "; export CPPFLAGS
fi
}}}

== linbox-20070915.p3 ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
   CPPFLAGS="-O2 -g -m64 "; export CPPFLAGS
fi
}}}

== f2c-20070816 ==

uncomment "CFLAGS = -O" in f2c/makefile
uncomment "CFLAGS = -O -fPIC" in libf2c/makefile
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "
else
   CFLAGS="-fPIC"
fi
}}}
Dual architecture static lib is created, but f2c works

== mpfi ==
{{{
if [ `uname` = "Darwin" -a "$SAGE64" = "yes" ]; then
   echo "64 bit MacIntel"
   CFLAGS="-O2 -g -m64 "; export CFLAGS
   CXXFLAGS="-O2 -g -m64 "; export CXXFLAGS
   CPPFLAGS="-O2 -g -m64 "; export CPPFLAGS
fi
}}}

== quaddouble-2.2.p7 ==
{{{
CXXFLAGS='-fPIC -O3 -Dx86 -m64'
export CXXFLAGS
}}}

== twisted-2.5.0.p8 ==
depends on pymactoolbox.h?
{{{
gcc -fno-strict-aliasing -Wno-long-double -no-cpp-precomp -mno-fused-madd -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -m64 -I/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5 -c twisted/internet/cfsupport/cfsupport.c -o build/temp.macosx-10.3-i386-2.5/twisted/internet/cfsupport/cfsupport.o -w
In file included from twisted/internet/cfsupport/cfsupport.c:8:
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:138: error: syntax error before ‘Track’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:140: error: syntax error before ‘Movie’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:142: error: syntax error before ‘MovieController’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:146: error: syntax error before ‘UserData’
/Users/mabshoff/sage-2.10.alpha2/local/include/python2.5/pymactoolbox.h:148: error: syntax error before ‘Media’
error: command 'gcc' failed with exit status 1
Error: Subprocess exited with result 1 for project core
Error installing Twisted networking framework

real    0m5.832s
user    0m1.288s
sys     0m0.744s
sage: An error occurred while installing twisted-2.5.0.p8
Please email sage-devel http://groups.google.com/group/sage-devel
explaining the problem and send the relevant part of
of /Users/mabshoff/sage-2.10.alpha2/install.log.  Describe your computer, operating system, etc.
If you want to try to fix the problem, yourself *don't* just cd to
/Users/mabshoff/sage-2.10.alpha2/spkg/build/twisted-2.5.0.p8 and type 'make'.
Instead type "/Users/mabshoff/sage-2.10.alpha2/sage -sh"
in order to set all environment variables correctly, then cd to
/Users/mabshoff/sage-2.10.alpha2/spkg/build/twisted-2.5.0.p8
(When you are done debugging, you can type "exit" to leave the
subshell.)
make[1]: *** [installed/twisted-2.5.0.p8] Error 1
}}}

== singular-3-0-4-1-20071209.p3 ==
{{{
CXXFLAGS="$CXXFLAGS -fPIC -O3 -g -m64"; export CXXFLAGS
CFLAGS="$CFLAGS -fPIC -O3 -g -m64"; export CFLAGS
CPPFLAGS="$CXXFLAGS -fPIC -O3 -g -m64"; export CPPFLAGS
}}}

== polybori ==
{{{
64 bit MacIntel
Starting build...
Running build_polybori...
scons: Reading SConscript files ...
KeyError: 'PYTHONHOME':
  File "/Users/mabshoff/sage-2.10.alpha2/spkg/standard/polybori-0.1-r6/src/PolyBoRi-0.1/SConstruct", line 105:
    env=Environment(ENV = {'PATH': os.environ['PATH']}, options=opts,tools = tools, toolpath = '.')
  File "/Users/mabshoff/sage-2.10.alpha2/local/lib/scons-0.97/SCons/Environment.py", line 779:
    options.Update(self)
  File "/Users/mabshoff/sage-2.10.alpha2/local/lib/scons-0.97/SCons/Options/__init__.py", line 145:
    execfile(filename, values)
  File "custom.py", line 13:
    PYPREFIX=os.environ['PYTHONHOME']
  File "/Users/mabshoff/sage-2.10.alpha2/local/lib/python2.5/UserDict.py", line 22:
    raise KeyError(key)
Error building PolyBoRi.
}}}

== sagelib==
sage -b: devel/sage/c_lib/SConstruct 
{{{
## We want the debug and optimization flags, since debug symbols are so useful, etc.
env.Append( CFLAGS="-O2 -g -m64" )
env.Append( CXXFLAGS="-O2 -g -m64" )
}}}


== libm4fri ==
{{{
CFLAGS="$CFLAGS -fPIC $INCLUDES -L$SAGE_LOCAL/lib -m64"
CXXFLAGS="$CXXFLAGS -fPIC $INCLUDES -L$SAGE_LOCAL/lib -m64"
CPPFLAGS="$INCLUDES -m64"
}}}


#####################################################################


== numpy, scipy & friends ==

With Python 2.5.2. compiler with {{{--with-gcc="gcc -m64"}}} numpy builds fine. More investigation is needed here.

== Done (incomplete list) ==

 * givaro-3.2.6.p10
 * gsl-1.10
 * libfplll
 * mpfr-2.3.0.p0
 * ntl-5.4.2
 * symmetrica-2.0.p2
 * pari-2.3.3

Diff for "osx64"