6699
Comment:

13613

Deletions are marked like this.  Additions are marked like this. 
Line 1:  Line 1: 
= Use and Contribute to the sagecombinat tree : step by step = Here are the basics steps in order to contribute some of your code to sagecombinat. We assume that the sagecombinat patches are readilly installed (see above!!!!!!!!). == The Sagecombinat stack of patches == Sagecombinat is a collection of experimental patches (i.e. extensions) on top of Sage. Each patch describes a relatively atomic modification which may span several files; it may fix a bug, implement a new feature, improve some documentation, ... TODO: insert a short example here: The patches are organized as a (totally ordered) stack, each being applied on top of the previous one. Technically, they are managed as a Mercurial queue. Let's look at a typical stack of patches: {{{ hg qseries 
#pragma sectionnumbers 2 = The SageCombinat patch server: step by step instructions = This page is meant as a stepbystep tutorial on using the SageCombinat patch server, from basic installation to contributing new patches: <<TableOfContents(3)>> For technical background on the patch server, see http:/combinat/Mercurial. == Installation and basic usage == === Prerequisites === We assume that: * Sage 3.2 or higher is already installed (say in {{{/opt/sage}}}), and can be started by typing {{{sage}}} at the command line (it is recommended to use the most recent stable version) * The user has write access on the {{{Sage}}} installation tree * The user has access to: http://sage.math.washington.edu:2144/ The patch management is based on the version control system Mercurial, with a support script {{{sage combinat}}} for ease of use. Online help on this script is accessible through: {{{ sage combinat help }}} Mercurial requires some configuration. Open (or create, if it does not exist yet) your Mercurial configuration file ({{{~/.hgrc}}} in your home directory), insert the following, and edit the username: {{{ [ui] username = Simon Cussonnet <Simon.Cussonnet at lyceetechnique.torrez.eure.fr> [extensions] hgext.mq = extdiff = alias = [alias] qstatus = status rev 2:. [hooks] preqrefresh = (echo "Are you sure you want to refresh the following changes:"; sage hg status; echo n "into the patch: "; sage hg qtop; read p "(y/n)" answer; test "$answer" = "y" ) [extdiff] cmd.interdiff = hginterdiff }}} === Downloading and installing the Sagecombinat patches === {{{ sage combinat install }}} === Updating the SageCombinat patches === To update the SageCombinat patches to the latest version, you can run: {{{ sage combinat update }}} It is possible to simultaneously upgrade Sage to the latest version, for now, it is more safe to run both: {{{ sage upgrade sage combinat upgrade }}} === Uninstalling the Sagecombinat patches === {{{ sage b main }}} Now, you may destroy {{{.../sage/devel/sagecombinat/}}} (after checking that you do not have local changes!) == Looking and selecting the patches == === The Sagecombinat stack of patches === Sagecombinat is a collection of experimental patches (i.e. extensions) on top of Sage. Each patch describes a relatively atomic modification which may span several files; it may fix a bug, implement a new feature, improve some documentation, ... Here is an example of a patch: {{{ diff r 01fabd9b3951 sage/combinat/subword.py  a/sage/combinat/subword.py +++ b/sage/combinat/subword.py @@ 34,7 +34,8 @@ def Subwords(w, k=None): """  Returns the combinatorial class of subwords of w. + Returns the combinatorial class of subwords of w. The word w can be given + by either a string or a list. If k is specified, then it returns the combinatorial class of subwords of w of length k. }}} It reads as follows: the first four lines tells that this patch modifies the file {{{sage/combinat/subword.py}}}. The line starting with {{{}}} is replaces by the two lines starting with {{{+}}}. To be able to apply the modifications safely at the right place, some context information is also stored (ie: some more unmodified lines and the position of the modification into the file). The patches are organized as a (totally ordered) stack, each being applied on top of the previous one. The most stable are at the bottom, while the most experimental ones are on top. Let's look at a typical stack of patches: {{{ sage hg qseries 
Line 29:  Line 105: 
The patch sage3.2.patch contains all the sagecombinat patches that have readilly been integrated in sage 3.2. Up to some point, it allows for using the later patches on older versions of sage. The patch lazy_attributes4371nt.patch is about lazy attributes, related to [[http://sagetrac.org/sage_trac/ticket/4371 ticket number 4371 on Sage trac]], and is owned by Nicolas Thiéry (nt). == Top, applied and unapplied patches == It is possible to move up and down the stack, applying all the patches up to a given one. {{{ hg qpush # Apply the first patch in the series which is not currently applied hg qpop # Unapply the most recently applied patch hg qpush a # Apply all the patches hg qpop a # Upapplied all the patches 
The patch sage3.2.patch contains all the sagecombinat patches that have readilly been integrated in sage 3.2 (see "using sagecombinat with older versions of sage"). The patch lazy_attributes4371nt.patch is about lazy attributes, related to [[http://sagetrac.org/sage_trac/ticket/4371 ticket number 4371 on Sage trac]], and is owned by NicolasThiéry (nt). In practice, the stack of patches is managed as a Mercurial queue. The command {{{sage hg}}} calls the version of Mercurial that comes with {{{Sage}}}. You may instead simply use {{{hg}}} if Mercurial is installed natively on your system. === Top, applied and unapplied patches === It is possible to move up and down the stack, applying only the patches up to a given one. {{{ sage hg qpush # Apply the first patch in the series which is not currently applied sage hg qpop # Unapply the most recently applied patch sage hg qpush a # Apply all the patches sage hg qpop a # Unapply all the patches 
Line 45:  Line 122: 
hg qtop # Top applied patch hg qapplied # Currently applied patches hg qunapplied # Currently unapplied patches 
sage hg qtop # Top applied patch sage hg qapplied # Currently applied patches sage hg qunapplied # Currently unapplied patches 
Line 56:  Line 133: 
== Looking inside patches ==  === Looking inside patches === 
Line 60:  Line 137: 
hg qdiff  sage hg qdiff 
Line 64:  Line 141: 
hg qstatus }}} ~+5. Create a patch+~ Note that a patch has a unique owner so you should only modify a patch that is already yours. Changes always go to the actual top patch currently applied. So before doing any changes, you must determine the patch where the changes should be saved. If it is your first contribution, start by creating a patch: {{{ $ hg qpush a #facultatif $ hg qnew my_improvement_AB.patch }}} The line {{{hg qpush a}}} is only to make sure that the new patch is be created on top of the stack, because {{{qnew}}} creates a new patch right after the most recently applied patch. It is suggested to add your initials (here AB) in the name so that everybody knows who owns what. TODO : Add more details about naming of patch. ~+6. Do your modifications+~ Before making any modifications, make sure the current top patch is yours and is the one you want to add your modifications to. Use {{{qpop}}} and {{{qpush}}} to move to the desired patch to modify. Note that you can *not* use {{{qpop}}} and {{{qpush}}} commands once you started modifications. {{{ $ hg qtop #to print the current top patch $ hg qpop $ hg qpush #to change the top patch currently applied }}} Once you set the current top patch to the one you want, do your modifications to one or many existing files. At any time, you can review your modifications done since the last {{{qrefresh}}} (explained below) or since the creation of the patch by doing: {{{ $ hg diff #complete modifications since last qrefresh $ hg status #list the modified files since last qrefresh }}} If you added a file, you must declare it using the command: {{{ $ hg add <filename> }}} ~+7. QRefresh the patch+~ Currently, the modifications are still not part of the patch as seen by the command {{{ $ hg qdiff $ hg qstatus }}} that does not display them. Use {{{ $ hg qrefresh }}} to put the actual modifications in the current top patch. You can see that it worked when typing the command {{{ $ hg qdiff $ hg qstatus }}} that should now include your modifications and by the command {{{ $ hg diff $ hg status }}} that should not display them anymore. ~+8. Do more modifications+~ After {{{qrefresh}}}, you can now use {{{qpop}}} and {{{qpush}}} again and modify the same or other patches you already created. See steps 37. ~+9. Remove a patch+~ It is possible that you want to remove one of your patch from the stack. For example, you may have created a patch while reading these lines put don't want it to get in the sagecombinat server : {{{ $ hg qremove my_improvement_AB.patch 
sage hg qstatus }}} === Using the sagecombinat patches with an older version of sage === For the convenience of the user, it is usually possible to use the sagecombinat patches with older versions of sage. The intent is only to temporarily support one or two older versions of sage (that is about one month old). Typical use case: a developper urgently needs the latest version of a patch for a software demonstration at a conference, but can't instantly upgrade because of a slow internet connection. There is no guarantee whatsoever; on occasion we do not support this when this causes technical difficulties. This is the purpose of the patches like {{{sage3.0.2.patch}}}. This particular patch contains all the sagecombinat patches that have been integrated into Sage 3.0.2, and is only applied if Sage's version is strictly less than 3.0.2. This is achieved through guards (see the next section), and is taken care of automatically by {{{sage combinat}}}, and in particular by: {{{ sage combinat qselect }}} === Selecting guarded patches === Some patches may be guarded since they are experimental, not yet finished, or should be only applied for certain versions of sage. Guarded patches are not applied unless explicitly chosen. For example if one would like to apply patches labeled [+experimental] one can use the following steps: {{{ sage hg qselect experimental sage combinat qselect }}} Then reapply the appropriate patches, typically with: {{{ sage hg qpop a sage hg qpush a }}} To disregard all guarded patches one uses instead: {{{ sage hg qselect n sage combinat qselect }}} == Creating and contributing patches == === Patch naming convention === Each patch should be of the form: {{{ <theme>_<feature/fix>_<trac ref if any>_<rev if any>_<owner or final or closed>.patch }}} Examples: {{{ rootsystemslattices_nt.patch partitions_fix_3244_mh.patch crystalsaffine_as.patch freemodules_1_mh.patch freemodules_2_mh.patch freemodules_final.patch dyckwords_closed.patch }}} A series of patches like the free_modules one above is intended to be progressively folded together into a single patch free_modules.patch before submission to sage (see patch folding below). The name free_modules_final indicates that the owner of this patch will no longer edit it, and it is ready to be posted to trac. The name *_closed.patch indicates that this patch has been posted to trac and the corresponding ticket has been closed. === Creating a new patch (qnew) === The first step is to create a new patch. It is easier to create it before doing any modifications to the sage sources. '''Never modify a patch that you do not own.''' {{{ sage hg qnew my_improvement_ab.patch }}} where ab are your initials. The new patch is created on top of the most recently applied patch. You may use {{{qpush}}} and {{{qpop}}} first to choose where your patch is created. === Editing the Sage sources === It is recommended to double check that the current top patch is yours and is the one you want to add your modifications to (see {{{qtop}}} and {{{qpop/qpush}}}). '''using {{{qpop}}} and {{{qpush}}} become tricky to use once you started modifications.''' Now you can edit the Sage sources files to your taste in {{{$SAGE_ROOT/devel/sagecombinat/sage/}}}. At any time, you can review your modifications since the creation of the patch (or since the last {{{qrefresh}}}, see below) by doing: {{{ sage hg diff #complete modifications since last qrefresh sage hg status #list the modified files since last qrefresh }}} If you added a new source file, you must declare it using the command: {{{ sage hg add <filename> }}} === Refreshing your patch (qrefresh) === Currently, the modifications are still not part of the patch as may be seen with the commands {{{ sage hg qdiff sage hg qstatus }}} Use {{{ sage hg qrefresh }}} to put the actual modifications in the current top patch. You can check that they have been included in the patch with: {{{ sage hg qdiff sage hg qstatus }}} Also, they should appear anymore in: {{{ sage hg diff sage hg status }}} After {{{qrefresh}}}, you can use {{{qpop}}} and {{{qpush}}} again and modify the same patch or some other patch you already created. === Removing a patch === In case you want to discard your patch, you may use: {{{ sage hg qremove my_improvement_AB.patch 
Line 132:  Line 257: 
$ hg qseries }}} to confirm the patch is removed. ~+10. Commit your changes to the local mercurial database+~ After having done modifications to one or to many patches, you migth want to commit them to the *local* mercurial database: {{{ $ hg qcommit }}} It includes all the changes to the patches done since the last commit. An editor will appear for you to provide a description of all the changes you made. ~+11. Merge your changes with other sagecombinat developpers+~ There is a possibility that somebody else pushed changes to the server since the last time you updated your sagecombinat tree. The local mercurial database will be used to merge those modifications. First pull any recent changes on the server by doing : {{{ $ cd .hg/patches $ hg pull u }}} and {{{ $ hg merge }}} if needed. If there are conflicts between your changes and some recent changes on the server, then consult the [[http:/combinat/Mercurialadvanced instructions]]. ~+12. Push your changes to the server+~ Here is where you must be prudent. Before committing any changes to the server, make sure that {{{sage br}}} works fine: {{{ $ hg qpop a $ hg qpush a $ sage br }}} and that it passes the tests {{{ $ sage t <filenames> }}} and maybe even that the notebook still works (!) {{{ sage: notebook() }}} Then push your changes to server after making sure one more time that there is no new changes on the server: {{{ $ cd .hg/patches $ hg pull u $ hg push }}} 
sage hg qseries }}} to confirm that the patch is removed. === Pushing patches to the sagecombinat server === Go to the sagecombinat directory, and make sure that there is no local changes: {{{ cd $SAGE_ROOT/devel/sagecombinat sage hg status }}} Otherwise dicard them ({{{sage hg revert}}}) or save them in your favorite patch ({{{sage hg qrefresh}}}). Pull the latest version of the patches from the server, and make sure that everything is working fine after applying all patches: {{{ sage combinat update f sage hg qpush a sage br # Make sure this works sage t filenames # If you believe your tests should pass, check them. }}} The {{{f}}} is to tell {{{sage combinat}}} to run even if your patch directory is modified, which it probably is. When pulling from the server, your changes will be merged with those from the server. You may get conflicts in the series file, or patches that do not apply anymore. Fix the patches that you own, and get in touch with the owners of the other broken patches. When everything is ready, double check that you are up to date: {{{ sage combinat update f }}} and then: {{{ cd $SAGE_ROOT/devel/sagecombinat/.hg/patches sage hg commit sage hg push }}} In case you have been unlucky, and there has been a change on the patch server between your last pull and your commit, push will fail with an error like "abort: push creates new remote heads! did you forget to merge?". You then have to merge your local modifications with the remote ones: {{{ cd .hg/patches sage hg pull u sage hg merge }}} If the merge goes through automatically, just commit with "Merge" as message, and push. Otherwise, well, feel free to ask for help! === Exporting Patches for use with trac === When a patch is ready to be applied to {{{Sage}}}, you should first verify that it will apply cleanly. If you want to be able to undo anything you do in this step, you should run {{{sage hg qcommit }}} before beginning. The first step is, from the {{{PATCHES}}} directory, manually edit the {{{series }}} to move your patch in the queue, so that your patch (or patches) are applied only to patches labelled *_closed. Then (from the source directories) use {{{qpush}}} and {{{qpop}}} to bring the first of your patches to the top of the stack (ie, only one of your patches should be applied). Suppose your patches were called 1.patch and 2.patch, and you currently have 1.patch at the top of the stack, and 2.patch as the next patch to be applied. The command {{{sage hg qfold 2.patch}}} will incorporate the changes from 2.patch into 1.patch, and then delete 2.patch. You should repeat this process until all patches working on one particular issue have been incorporated. Then you should make sure that sage builds, runs, and passes tests, with just this patch applied only to patches that have already been closed. Don't forget to also commit and push your changes to the server. The next step is to export your patch for submission. Running "sage hg export" includes extra information in the patch such as the author of the patch. {{{ cd $SAGE_ROOT/devel/sagecombinat sage hg export new_feature.patch > /path/to/new_feature_for_trac.patch }}} You would then upload the file new_feature_for_trac.patch to the appropriate ticket on the Sage Trac server, creating the ticket if necessary. Procedures for using the trac system are described here: http://wiki.sagemath.org/TracGuidelines 
The SageCombinat patch server: step by step instructions
This page is meant as a stepbystep tutorial on using the SageCombinat patch server, from basic installation to contributing new patches:
Contents
For technical background on the patch server, see http:/combinat/Mercurial.
1. Installation and basic usage
1.1. Prerequisites
We assume that:
Sage 3.2 or higher is already installed (say in /opt/sage), and can be started by typing sage at the command line
 (it is recommended to use the most recent stable version)
The user has write access on the Sage installation tree
The user has access to: http://sage.math.washington.edu:2144/
The patch management is based on the version control system Mercurial, with a support script sage combinat for ease of use. Online help on this script is accessible through:
sage combinat help
Mercurial requires some configuration. Open (or create, if it does not exist yet) your Mercurial configuration file (~/.hgrc in your home directory), insert the following, and edit the username:
[ui] username = Simon Cussonnet <Simon.Cussonnet at lyceetechnique.torrez.eure.fr> [extensions] hgext.mq = extdiff = alias = [alias] qstatus = status rev 2:. [hooks] preqrefresh = (echo "Are you sure you want to refresh the following changes:"; sage hg status; echo n "into the patch: "; sage hg qtop; read p "(y/n)" answer; test "$answer" = "y" ) [extdiff] cmd.interdiff = hginterdiff
1.2. Downloading and installing the Sagecombinat patches
sage combinat install
1.3. Updating the SageCombinat patches
To update the SageCombinat patches to the latest version, you can run:
sage combinat update
It is possible to simultaneously upgrade Sage to the latest version, for now, it is more safe to run both:
sage upgrade sage combinat upgrade
1.4. Uninstalling the Sagecombinat patches
sage b main
Now, you may destroy .../sage/devel/sagecombinat/ (after checking that you do not have local changes!)
2. Looking and selecting the patches
2.1. The Sagecombinat stack of patches
Sagecombinat is a collection of experimental patches (i.e. extensions) on top of Sage. Each patch describes a relatively atomic modification which may span several files; it may fix a bug, implement a new feature, improve some documentation, ... Here is an example of a patch:
diff r 01fabd9b3951 sage/combinat/subword.py  a/sage/combinat/subword.py +++ b/sage/combinat/subword.py @@ 34,7 +34,8 @@ def Subwords(w, k=None): """  Returns the combinatorial class of subwords of w. + Returns the combinatorial class of subwords of w. The word w can be given + by either a string or a list. If k is specified, then it returns the combinatorial class of subwords of w of length k.
It reads as follows: the first four lines tells that this patch modifies the file sage/combinat/subword.py. The line starting with  is replaces by the two lines starting with +. To be able to apply the modifications safely at the right place, some context information is also stored (ie: some more unmodified lines and the position of the modification into the file).
The patches are organized as a (totally ordered) stack, each being applied on top of the previous one. The most stable are at the bottom, while the most experimental ones are on top. Let's look at a typical stack of patches:
sage hg qseries
It will display something like:
sage3.1.3.patch sage3.2.patch ... lazy_attributes4371nt.patch copy_on_write_fh.patch discrete_functionnt.patch crystals_alcove_path_model_bj.patch words_new_fcts_sl.patch
sage3.1.3 is at the bottom of the stack, and is applied first, while words_new_fcts_sl.patch is applied last. The patch sage3.2.patch contains all the sagecombinat patches that have readilly been integrated in sage 3.2 (see "using sagecombinat with older versions of sage"). The patch lazy_attributes4371nt.patch is about lazy attributes, related to ticket number 4371 on Sage trac, and is owned by NicolasThiéry (nt).
In practice, the stack of patches is managed as a Mercurial queue. The command sage hg calls the version of Mercurial that comes with Sage. You may instead simply use hg if Mercurial is installed natively on your system.
2.2. Top, applied and unapplied patches
It is possible to move up and down the stack, applying only the patches up to a given one.
sage hg qpush # Apply the first patch in the series which is not currently applied sage hg qpop # Unapply the most recently applied patch sage hg qpush a # Apply all the patches sage hg qpop a # Unapply all the patches
If you get confused, the following can tell you which patches are applied or not:
sage hg qtop # Top applied patch sage hg qapplied # Currently applied patches sage hg qunapplied # Currently unapplied patches
Note that after moving around the stack of patches, it is necessary to rebuild sage before using it :
sage b sage
2.3. Looking inside patches
The content of the current top patch can be retrieved with
sage hg qdiff
while a brief summary of the modifed files is given by
sage hg qstatus
2.4. Using the sagecombinat patches with an older version of sage
For the convenience of the user, it is usually possible to use the sagecombinat patches with older versions of sage. The intent is only to temporarily support one or two older versions of sage (that is about one month old). Typical use case: a developper urgently needs the latest version of a patch for a software demonstration at a conference, but can't instantly upgrade because of a slow internet connection. There is no guarantee whatsoever; on occasion we do not support this when this causes technical difficulties.
This is the purpose of the patches like sage3.0.2.patch. This particular patch contains all the sagecombinat patches that have been integrated into Sage 3.0.2, and is only applied if Sage's version is strictly less than 3.0.2. This is achieved through guards (see the next section), and is taken care of automatically by sage combinat, and in particular by:
sage combinat qselect
2.5. Selecting guarded patches
Some patches may be guarded since they are experimental, not yet finished, or should be only applied for certain versions of sage. Guarded patches are not applied unless explicitly chosen. For example if one would like to apply patches labeled [+experimental] one can use the following steps:
sage hg qselect experimental sage combinat qselect
Then reapply the appropriate patches, typically with:
sage hg qpop a sage hg qpush a
To disregard all guarded patches one uses instead:
sage hg qselect n sage combinat qselect
3. Creating and contributing patches
3.1. Patch naming convention
Each patch should be of the form:
<theme>_<feature/fix>_<trac ref if any>_<rev if any>_<owner or final or closed>.patch
Examples:
rootsystemslattices_nt.patch partitions_fix_3244_mh.patch crystalsaffine_as.patch freemodules_1_mh.patch freemodules_2_mh.patch freemodules_final.patch dyckwords_closed.patch
A series of patches like the free_modules one above is intended to be progressively folded together into a single patch free_modules.patch before submission to sage (see patch folding below). The name free_modules_final indicates that the owner of this patch will no longer edit it, and it is ready to be posted to trac. The name *_closed.patch indicates that this patch has been posted to trac and the corresponding ticket has been closed.
3.2. Creating a new patch (qnew)
The first step is to create a new patch. It is easier to create it before doing any modifications to the sage sources. Never modify a patch that you do not own.
sage hg qnew my_improvement_ab.patch
where ab are your initials. The new patch is created on top of the most recently applied patch. You may use qpush and qpop first to choose where your patch is created.
3.3. Editing the Sage sources
It is recommended to double check that the current top patch is yours and is the one you want to add your modifications to (see qtop and qpop/qpush). using qpop and qpush become tricky to use once you started modifications.
Now you can edit the Sage sources files to your taste in $SAGE_ROOT/devel/sagecombinat/sage/. At any time, you can review your modifications since the creation of the patch (or since the last qrefresh, see below) by doing:
sage hg diff #complete modifications since last qrefresh sage hg status #list the modified files since last qrefresh
If you added a new source file, you must declare it using the command:
sage hg add <filename>
3.4. Refreshing your patch (qrefresh)
Currently, the modifications are still not part of the patch as may be seen with the commands
sage hg qdiff sage hg qstatus
Use
sage hg qrefresh
to put the actual modifications in the current top patch. You can check that they have been included in the patch with:
sage hg qdiff sage hg qstatus
Also, they should appear anymore in:
sage hg diff sage hg status
After qrefresh, you can use qpop and qpush again and modify the same patch or some other patch you already created.
3.5. Removing a patch
In case you want to discard your patch, you may use:
sage hg qremove my_improvement_AB.patch
You may use
sage hg qseries
to confirm that the patch is removed.
3.6. Pushing patches to the sagecombinat server
Go to the sagecombinat directory, and make sure that there is no local changes:
cd $SAGE_ROOT/devel/sagecombinat sage hg status
Otherwise dicard them (sage hg revert) or save them in your favorite patch (sage hg qrefresh).
Pull the latest version of the patches from the server, and make sure that everything is working fine after applying all patches:
sage combinat update f sage hg qpush a sage br # Make sure this works sage t filenames # If you believe your tests should pass, check them.
The f is to tell sage combinat to run even if your patch directory is modified, which it probably is.
When pulling from the server, your changes will be merged with those from the server. You may get conflicts in the series file, or patches that do not apply anymore. Fix the patches that you own, and get in touch with the owners of the other broken patches.
When everything is ready, double check that you are up to date:
sage combinat update f
and then:
cd $SAGE_ROOT/devel/sagecombinat/.hg/patches sage hg commit sage hg push
In case you have been unlucky, and there has been a change on the patch server between your last pull and your commit, push will fail with an error like "abort: push creates new remote heads! did you forget to merge?". You then have to merge your local modifications with the remote ones:
cd .hg/patches sage hg pull u sage hg merge
If the merge goes through automatically, just commit with "Merge" as message, and push. Otherwise, well, feel free to ask for help!
3.7. Exporting Patches for use with trac
When a patch is ready to be applied to Sage, you should first verify that it will apply cleanly. If you want to be able to undo anything you do in this step, you should run sage hg qcommit before beginning.
The first step is, from the PATCHES directory, manually edit the series to move your patch in the queue, so that your patch (or patches) are applied only to patches labelled *_closed. Then (from the source directories) use qpush and qpop to bring the first of your patches to the top of the stack (ie, only one of your patches should be applied). Suppose your patches were called 1.patch and 2.patch, and you currently have 1.patch at the top of the stack, and 2.patch as the next patch to be applied. The command sage hg qfold 2.patch will incorporate the changes from 2.patch into 1.patch, and then delete 2.patch. You should repeat this process until all patches working on one particular issue have been incorporated.
Then you should make sure that sage builds, runs, and passes tests, with just this patch applied only to patches that have already been closed. Don't forget to also commit and push your changes to the server.
The next step is to export your patch for submission. Running "sage hg export" includes extra information in the patch such as the author of the patch.
cd $SAGE_ROOT/devel/sagecombinat sage hg export new_feature.patch > /path/to/new_feature_for_trac.patch
You would then upload the file new_feature_for_trac.patch to the appropriate ticket on the Sage Trac server, creating the ticket if necessary. Procedures for using the trac system are described here: http://wiki.sagemath.org/TracGuidelines