3010
Comment:
|
5442
|
Deletions are marked like this. | Additions are marked like this. |
Line 3: | Line 3: |
Ondrej wrote this wiki page, but please read this important statement from Michael: '''Important''': One should note that this can cause various problems due to different python build options. Currently the script below does not work on OSX since Apple's Python is compiled with ucs2 while Sage's Python is compiled with ucs4. Once you compile Sage's Python with ucs2 you will then have the problem that Apple's Python is universal and build with different options than Sage's Python. The upcoming 64 bit Sage will not work at all unless Apple upgrades its Python in OSX 10.6 to be also universal in 64 bit mode. If you encounter any bug or problem please state clearly that you are using the system's python since that configuration might contribute to the problem. The Sage people will attempt to reproduce the problem with vanilla Sage, but because there are a large number of distributions out there we cannot debug problems where we might not have access, so if you break Sage that way you get to keep the pieces ;-). That being said we encourage you to experiment with Sage and use it from your system's Python, we just need to know if anything goes wrong. Michael Abshoff, Release Manager of Sage == Easy Way == Create this `s.py` python script: {{{ #!python import os import re import sys def set_paths(root="/home/ondra/ext/sage"): """ Set paths necessary to import sage. root ... the path to your Sage installation """ python_path = [ root+"/local/lib/python", root+"/local/lib/python2.5/lib-dynload", root+"/local/lib/python2.5/site-packages", ] sys.path = python_path + sys.path paths = { "SAGE_ROOT": root, "SAGE_LOCAL": root+"/local", "DOT_SAGE": "~/.sage/", "SAGE_SERVER": "http://www.sagemath.org/", "PATH": root+"/local/bin:"+os.environ["PATH"], } os.environ.update(paths) def import_sageall(): """ Imports sage by "import sage.all". If it fails, write a helpful message and exit. After executing this method, you can be sure that sage just works, e.g you can do from sage.all import something without worrying. """ try: import sage.all except ImportError, e: if re.match("(.*).so: cannot open shared object file: No such file or directory", e.message): # all seems to be just a LD_LIBRARY_PATH problem in 99% of cases print """\ "import sage.all" failed when importing an .so library, this is most probably an LD_LIBRARY_PATH problem, please set your LD_LIBRARY_PATH and try again, e.g. execute: LD_LIBRARY_PATH=%s/local/lib python %s""" % (os.environ.get("SAGE_ROOT", ""), sys.argv[0]) sys.exit() else: # some other problem raise set_paths() import_sageall() from sage.all import * var("x") e = x**2/3-log(x) print e print integrate(e, x) }}} and try to run it: {{{ $ python s.py "import sage.all" failed when importing an .so library, this is most probably an LD_LIBRARY_PATH problem, please set your LD_LIBRARY_PATH and try again, e.g. execute: LD_LIBRARY_PATH=/home/ondra/ext/sage/local/lib python s.py }}} it tells you the exact command that you need to execute to make it work, so do it: {{{ $ LD_LIBRARY_PATH=/home/ondra/ext/sage/local/lib python s.py 2 x -- - log(x) 3 3 x - x log(x) + -- + x 9 }}} So as you can see from the above, all you have to do is to set the `root` keyword parameter in the script to point to your Sage installation and that's it. The script will tell you the correct command to run itself. == Robust Way == |
|
Line 4: | Line 91: |
Line 6: | Line 94: |
Line 8: | Line 95: |
Line 12: | Line 98: |
Line 14: | Line 99: |
Line 16: | Line 100: |
Line 20: | Line 103: |
Line 21: | Line 105: |
$ ./run_sage Python 2.5.1 (r251:54863, Mar 29 2008, 09:29:46) |
$ ./run_sage Python 2.5.1 (r251:54863, Mar 29 2008, 09:29:46) |
Line 24: | Line 108: |
Line 30: | Line 113: |
Line 33: | Line 115: |
In [2]: var("x") |
In [2]: var("x") |
Line 36: | Line 117: |
In [3]: x**2/4 + log(x) |
In [3]: x**2/4 + log(x) |
Line 40: | Line 120: |
Now, if you don't want to setup so many things, create this `s.py` python script: {{{ import os import sys def set_paths(): root = os.environ["SAGE_ROOT"] python_path = [ root+"/local/bin", root+"/local/lib/python2.5/site-packages/setuptools-0.6c8-py2.5.egg", root+"/local/lib/python2.5/site-packages/SQLAlchemy-0.4.3-py2.5.egg", root+"/local/lib/python", root+"/local/lib/python25.zip", root+"/local/lib/python2.5/plat-linux2", root+"/local/lib/python2.5/lib-tk", root+"/local/lib/python2.5/lib-dynload", root+"/local/lib/python2.5/site-packages", root+"/local/lib/python2.5/site-packages/IPython/Extensions" ] paths = { "SAGE_LOCAL": root+"/local", "DOT_SAGE": "~/.sage/", "PATH": root+"/local/bin:"+os.environ["PATH"], } os.environ.update(paths) sys.path = python_path + sys.path set_paths() from sage.all import * var("x") print x**2/3-log(x) }}} and run it like this: {{{ $ SAGE_ROOT=/home/ondra/ext/sage LD_LIBRARY_PATH="$SAGE_ROOT/local/lib/openmpi:$SAGE_ROOT/local/lib/:" python s.py Falling back to a hard coded sage server in misc/hg.py 2 x -- - log(x) 3 }}} |
How to run Sage in a systemwide Python
Ondrej wrote this wiki page, but please read this important statement from Michael:
Important: One should note that this can cause various problems due to different python build options. Currently the script below does not work on OSX since Apple's Python is compiled with ucs2 while Sage's Python is compiled with ucs4. Once you compile Sage's Python with ucs2 you will then have the problem that Apple's Python is universal and build with different options than Sage's Python. The upcoming 64 bit Sage will not work at all unless Apple upgrades its Python in OSX 10.6 to be also universal in 64 bit mode. If you encounter any bug or problem please state clearly that you are using the system's python since that configuration might contribute to the problem. The Sage people will attempt to reproduce the problem with vanilla Sage, but because there are a large number of distributions out there we cannot debug problems where we might not have access, so if you break Sage that way you get to keep the pieces ;-). That being said we encourage you to experiment with Sage and use it from your system's Python, we just need to know if anything goes wrong.
- Michael Abshoff, Release Manager of Sage
Easy Way
Create this s.py python script:
1 import os
2 import re
3 import sys
4 def set_paths(root="/home/ondra/ext/sage"):
5 """
6 Set paths necessary to import sage.
7 root ... the path to your Sage installation
8 """
9 python_path = [
10 root+"/local/lib/python",
11 root+"/local/lib/python2.5/lib-dynload",
12 root+"/local/lib/python2.5/site-packages",
13 ]
14 sys.path = python_path + sys.path
15 paths = {
16 "SAGE_ROOT": root,
17 "SAGE_LOCAL": root+"/local",
18 "DOT_SAGE": "~/.sage/",
19 "SAGE_SERVER": "http://www.sagemath.org/",
20 "PATH": root+"/local/bin:"+os.environ["PATH"],
21 }
22 os.environ.update(paths)
23 def import_sageall():
24 """
25 Imports sage by "import sage.all".
26 If it fails, write a helpful message and exit. After executing this method,
27 you can be sure that sage just works, e.g you can do
28 from sage.all import something
29 without worrying.
30 """
31 try:
32 import sage.all
33 except ImportError, e:
34 if re.match("(.*).so: cannot open shared object file: No such file or directory", e.message):
35 # all seems to be just a LD_LIBRARY_PATH problem in 99% of cases
36 print """\
37 "import sage.all" failed when importing an .so library, this is most probably
38 an LD_LIBRARY_PATH problem, please set your LD_LIBRARY_PATH and try again, e.g. execute:
39 LD_LIBRARY_PATH=%s/local/lib python %s""" % (os.environ.get("SAGE_ROOT", ""),
40 sys.argv[0])
41 sys.exit()
42 else:
43 # some other problem
44 raise
45 set_paths()
46 import_sageall()
47 from sage.all import *
48 var("x")
49 e = x**2/3-log(x)
50 print e
51 print integrate(e, x)
and try to run it:
$ python s.py "import sage.all" failed when importing an .so library, this is most probably an LD_LIBRARY_PATH problem, please set your LD_LIBRARY_PATH and try again, e.g. execute: LD_LIBRARY_PATH=/home/ondra/ext/sage/local/lib python s.py
it tells you the exact command that you need to execute to make it work, so do it:
$ LD_LIBRARY_PATH=/home/ondra/ext/sage/local/lib python s.py 2 x -- - log(x) 3 3 x - x log(x) + -- + x 9
So as you can see from the above, all you have to do is to set the root keyword parameter in the script to point to your Sage installation and that's it. The script will tell you the correct command to run itself.
Robust Way
Create the run_sage bash script:
export SAGE_ROOT=/home/ondra/ext/sage export SAGE_LOCAL=$SAGE_ROOT/local export DOT_SAGE=~/.sage/ export PATH=$SAGE_ROOT/local/bin:$PATH export LD_LIBRARY_PATH="$SAGE_ROOT/local/lib/openmpi:$SAGE_ROOT/local/lib/:" export PYTHONPATH="$SAGE_ROOT/local/bin:$SAGE_ROOT/local/lib/python2.5/site-packages/setuptools-0.6c8-py2.5.egg:$SAGE_ROOT/local/lib/python2.5/site-packages/SQLAlchemy-0.4.3-py2.5.egg:$SAGE_ROOT/local/bin:$SAGE_ROOT/local/lib/python:$SAGE_ROOT/local/lib/python25.zip:$SAGE_ROOT/local/lib/python2.5/plat-linux2:$SAGE_ROOT/local/lib/python2.5/lib-tk:$SAGE_ROOT/local/lib/python2.5/lib-dynload:$SAGE_ROOT/local/lib/python2.5/site-packages:$SAGE_ROOT/local/lib/python2.5/site-packages/IPython/Extensions" ipython
Then:
$ ./run_sage Python 2.5.1 (r251:54863, Mar 29 2008, 09:29:46) Type "copyright", "credits" or "license" for more information. IPython 0.8.1 -- An enhanced Interactive Python. ? -> Introduction to IPython's features. %magic -> Information about IPython's 'magic' % functions. help -> Python's own help system. object? -> Details about 'object'. ?object also works, ?? prints more. In [1]: from sage.all import * Falling back to a hard coded sage server in misc/hg.py In [2]: var("x") Out[2]: x In [3]: x**2/4 + log(x) Out[3]: log(x) + x^2/4