Differences between revisions 7 and 22 (spanning 15 versions)
Revision 7 as of 2011-12-17 11:47:27
Size: 3512
Editor: mstreng
Comment:
Revision 22 as of 2011-12-17 13:49:40
Size: 5471
Editor: mstreng
Comment:
Deletions are marked like this. Additions are marked like this.
Line 10: Line 10:
 * Update MPFR to 3.1.0 - http://trac.sagemath.org/sage_trac/ticket/11666
   (Mike Hansen)
Line 15: Line 12:
 * Update MPFI to 1.5.0 - http://trac.sagemath.org/sage_trac/ticket/12171
   (Mike Hansen)
 * Building flint2 in Sage
   1.
Update MPFR to 3.1.0 - http://trac.sagemath.org/sage_trac/ticket/11666
      http://sage.math.washington.edu/mpfr-3.
1.0.spkg
    (Mike Hansen)
Line 18: Line 17:
== Switch some of the mwrank code to use flint2 ==    2. Update MPFI to 1.5.0 - http://trac.sagemath.org/sage_trac/ticket/12171
      http://sage.math.washington.edu/home/mhansen/mpfi-1.5.0.spkg
      (Mike Hansen)

   3. Reinstall http://sagemath.org/packages/standard/libfplll-3.0.12.p1.spkg

   4. Install flint2 spkg (beware, this will break Sage)
      http://sage.math.washington.edu/flint-2.3.spkg

   5. touch SAGE_ROOT/devel/sage/sage/combinat/partitions.*

   6. Run "sage -b"


== Switch some of the /eclib/mwrank code to use flint2, and upgrade the eclib spkg in Sage ==

 * People: John C., David H., Martin R., Maarten D., Flint developers
Line 22: Line 37:
 * People: Martin L., Simon K., Flint developers
Line 23: Line 40:

 * People: Martin A., if it is still going to happen
Line 77: Line 96:
Linear algebra over GF(p^k) can be reduced to linear algebra over GF(p) and for GF(2^k) the performance is very nice. Hence, it would be a good project to develop some somewhat generic infrastructure for dense matrices over GF(p^k), or even *any* extension field? The natural place to put this would be LinBox but perhaps we can start stand-alone and then integrate it with LinBox if LinBox is too scary to start with.  * People: Martin A., Simon K., Johan B.

Linear algebra over GF(p^k^) can be reduced to linear algebra over GF(p) and for GF(2^k^) the performance is very nice. Hence, it would be a good project to develop some somewhat generic infrastructure for dense matrices over GF(p^k), or even *any* extension field? The natural place to put this would be LinBox but perhaps we can start stand-alone and then integrate it with LinBox if LinBox is too scary to start with.
Line 81: Line 102:
At !AsiaCrypt 2011 Chen and Nguyen [[http://www.springerlink.com/content/m036804m1m538722/ |presented]] their new BKZ implementation which is much much more efficient than that in NTL. As far as I understand, the main improvements are due to "extreme pruning" as presented in a [[http://www.springerlink.com/content/x3l7g80454x11116/ |paper]] at !EuroCrypt 2010 and perhaps careful parameter choice. As far as I understand, they do not plan to make their code available. I don't know how much work it would be, but perhaps it would be a nice idea to patch NTL's BKZ to include extreme prunning and/or to port it to Flint2?  * People: mysterious people who added this project, Andy N.

At !AsiaCrypt 2011 Chen and Nguyen [[http://www.springerlink.com/content/m036804m1m538722/ |presented]] their new BKZ implementation which is much much more efficient than that in NTL. As far as I understand, the main improvements are due to "extreme pruning" as presented in a [[http://www.springerlink.com/content/x3l7g80454x11116/ |paper]] at !EuroCrypt 2010 and perhaps careful parameter choice. As far as I understand, they do not plan to make their code available. I don't know how much work it would be, but perhaps it would be a nice idea to patch NTL's BKZ to include extreme pruning and/or to port it to Flint2?
Line 84: Line 107:

 * People: Fredrik J., Andy N., David H.
Line 90: Line 115:

== Modular forms code in Sage ==

 * People: David L., John C., Frithjof, Johan B., Maarten D., Martin R., Simon K., Marco S.
 * review patches
 * fix that one patch that had a problem

== Open MP and FLINT ==

 * People: David H., Fredrik J., Bogdan B., Julian R.,

== Miscellaneous Sage Algebra and Number Theory patches ==

 * People: Francis C., Monique v B., Florian B., Sam S., Michiel K, Bogdan B., Colton, Jan, Marco S.
 
== Simon and ComputeL GP scripts ==

 * People: John C., Martin R., Marco S.
 * Revive work of March Sage Days

== Elliptic curve isogenies ==

 * People: Kimi T., John C., François Morain., Monique v B., Özge Ç., Marco S.

== Mestre's algorithm for constructing hyperelliptic curves from their invariants ==

 * People: Florian B., people from projects 10 and 12, Marco S.
 * Code for Mestre's algorithm is there (Florian), make this into a patch
 * Reduction of points for SL_2_ is also needed

   * easy for QQ
   * very interesting for number fields (Marco)

== Tate's Algorithm over function fields ==

 * People: Frithjof S, John C., Marco S.

Projects

Please feel free to add more

Put flint2 into Sage

Switch some of the /eclib/mwrank code to use flint2, and upgrade the eclib spkg in Sage

  • People: John C., David H., Martin R., Maarten D., Flint developers

Help the Singular developers make better use of flint2

  • People: Martin L., Simon K., Flint developers

Linear algebra mod p, for log_2 p = 64

  • People: Martin A., if it is still going to happen

Flint2 has an implementation for asymptotically fast linear algebra mod p for p up to 2^64. I (malb) am curious whether it can be improved using ideas inspired by M4RIE, i.e., replace multiplications by additions using pre-computation tables. Whether this is beneficial will depend on how much slower multiplication is than additions.

Update (2011-12-15 10:57): It seems the difference between scalar multiplication and addition is too small for these tricks to make sense.

#include <flint.h>
#include <nmod_mat.h>
#include <profiler.h>
#include <stdio.h>

#include "cpucycles-20060326/cpucycles.h"

int main(int argc, char *argv[]) {
  nmod_mat_t A,B,C;
  flint_rand_t state;
  unsigned long long cc0 = 0, cc1 = 0;
  unsigned long i,j;

  unsigned long long p = 4294967311ULL;

  flint_randinit(state);

  nmod_mat_init(A, 2000, 2000, p);
  nmod_mat_init(C, 2000, 2000, p);
  nmod_mat_randfull(A, state);

  cc0 = cpucycles();
  nmod_mat_scalar_mul(C, A, 14234);
  cc0 = cpucycles() - cc0;
  printf("scalar multiplication: %llu\n",cc0);

  cc1 = cpucycles();
  for (i = 0; i < A->r; i++) {
    for (j = 0; j < A->c; j++) {
      C->rows[i][j] =  A->rows[i][j] + A->rows[i][j];
    }
  }
  cc1 = cpucycles() - cc1;
  printf("addition: %llu\n",cc1);

  printf("ratio: %lf\n",((double)cc0)/(double)cc1);

  nmod_mat_clear(A);
  nmod_mat_clear(C);
  flint_randclear(state);
  return 0;
}

Gives a ratio of about 4.5.

Linear algebra mod p^n, for log_2 p small-ish

  • People: Martin A., Simon K., Johan B.

Linear algebra over GF(pk) can be reduced to linear algebra over GF(p) and for GF(2k) the performance is very nice. Hence, it would be a good project to develop some somewhat generic infrastructure for dense matrices over GF(p^k), or even *any* extension field? The natural place to put this would be LinBox but perhaps we can start stand-alone and then integrate it with LinBox if LinBox is too scary to start with.

BKZ 2.0

  • People: mysterious people who added this project, Andy N.

At AsiaCrypt 2011 Chen and Nguyen presented their new BKZ implementation which is much much more efficient than that in NTL. As far as I understand, the main improvements are due to "extreme pruning" as presented in a paper at EuroCrypt 2010 and perhaps careful parameter choice. As far as I understand, they do not plan to make their code available. I don't know how much work it would be, but perhaps it would be a nice idea to patch NTL's BKZ to include extreme pruning and/or to port it to Flint2?

Improve polynomial factoring mod p in flint2

  • People: Fredrik J., Andy N., David H.

The Cantor-Zassenhaus implementation in the flint2 nmod_poly module could be optimized:

  • Make exponentiation faster by precomputing a Newton inverse of the modulus
  • Use sliding window exponentiation
  • Use the von zur Gathen / Shoup algorithm (adapt the fast power series composition code for modular composition)

Modular forms code in Sage

  • People: David L., John C., Frithjof, Johan B., Maarten D., Martin R., Simon K., Marco S.
  • review patches
  • fix that one patch that had a problem

Open MP and FLINT

  • People: David H., Fredrik J., Bogdan B., Julian R.,

Miscellaneous Sage Algebra and Number Theory patches

  • People: Francis C., Monique v B., Florian B., Sam S., Michiel K, Bogdan B., Colton, Jan, Marco S.

Simon and ComputeL GP scripts

  • People: John C., Martin R., Marco S.
  • Revive work of March Sage Days

Elliptic curve isogenies

  • People: Kimi T., John C., François Morain., Monique v B., Özge Ç., Marco S.

Mestre's algorithm for constructing hyperelliptic curves from their invariants

  • People: Florian B., people from projects 10 and 12, Marco S.
  • Code for Mestre's algorithm is there (Florian), make this into a patch
  • Reduction of points for SL_2_ is also needed
    • easy for QQ
    • very interesting for number fields (Marco)

Tate's Algorithm over function fields

  • People: Frithjof S, John C., Marco S.

SageFlintDays/projects (last edited 2012-02-06 10:39:37 by mstreng)