Differences between revisions 45 and 46
Revision 45 as of 2009-06-04 03:14:27
Size: 35479
Editor: Minh Nguyen
Comment: Showcase efficiency gain of relativization of number fields
Revision 46 as of 2009-06-04 03:52:30
Size: 35457
Editor: Minh Nguyen
Comment:
Deletions are marked like this. Additions are marked like this.
Line 9: Line 9:
 * gcc 4.4.0 support

Sage 4.0 Release Tour

Sage 4.0 was released on May 29, 2009. For the official, comprehensive release note, please refer to sage-4.0.txt. A nicely formatted version of this release tour can be found at this Wordpress blog. The following points are some of the foci of this release:

  • New symbolics based on Pynac
  • Bring doctest coverage up to at least 75%
  • Solaris 10 support (at least for gcc 4.3.x + gmake)
  • Switch from Clisp to ECL
  • OS X 64-bit support

Algebra

  • Deprecate the order() method on elements of rings (John Palmieri) -- The method order() of the class sage.structure.element.RingElement is now deprecated and will be removed in a future release. For additive or multiplicative order, use the additive_order or multiplicative_order method respectively.

  • Partial fraction decomposition for irreducible denominators (Gonzalo Tornaria) -- For example, over the field ZZ[x] you can do

    sage: R.<x> = ZZ["x"]
    sage: q = x^2 / (x - 1)
    sage: q.partial_fraction_decomposition()
    (x + 1, [1/(x - 1)])
    sage: q = x^10 / (x - 1)^5
    sage: whole, parts = q.partial_fraction_decomposition()
    sage: whole + sum(parts)
    x^10/(x^5 - 5*x^4 + 10*x^3 - 10*x^2 + 5*x - 1)
    sage: whole + sum(parts) == q
    True

    and over the finite field GF(2)[x]:

    sage: R.<x> = GF(2)["x"]
    sage: q = (x + 1) / (x^3 + x + 1)
    qsage: q.partial_fraction_decomposition()
    (0, [(x + 1)/(x^3 + x + 1)])

Algebraic Geometry

  • Various invariants for genus 2 hyperelliptic curves (Nick Alexander) -- The following invariants for genus 2 hyperelliptic curves are implemented in the module sage/schemes/hyperelliptic_curves/hyperelliptic_g2_generic.py:

    • the Clebsch invariants
    • the Igusa-Clebsch invariants
    • the absolute Igusa invariants

Basic Arithmetic

  • Utility methods for integer arithmetics (Fredrik Johansson) -- New methods trailing_zero_bits() and sqrtrem() for the class Integer in sage/rings/integer.pyx:

    • trailing_zero_bits(self) -- Returns the number of trailing zero bits in self, i.e. the exponent of the largest power of 2 dividing self.

    • sqrtrem(self) -- Returns a pair (s, r) where s is the integer square root of self and r is the remainder such that self = s^2 + r.

    Here are some examples for working with these new methods:
    sage: 13.trailing_zero_bits()
    0
    sage: (-13).trailing_zero_bits()
    0
    sage: (-13 >> 2).trailing_zero_bits()
    2
    sage: (-13 >> 3).trailing_zero_bits()
    1
    sage: (-13 << 3).trailing_zero_bits()
    3
    sage: (-13 << 2).trailing_zero_bits()
    2
    sage: 29.sqrtrem()
    (5, 4)
    sage: 25.sqrtrem()
    (5, 0)
  • Casting from float to rationals (Robert Bradshaw) -- One can now create a rational out of a float. Here's an example:
    sage: a = float(1.0)
    sage: QQ(a)
    1
    sage: type(a); type(QQ(a))
    <type 'float'>
    <type 'sage.rings.rational.Rational'>
  • Speedup to Integer creation (Robert Bradshaw) -- Memory for recycled integers are only reclaimed if over 10 limbs are used, giving a significant speedup for small integers. (Previously all integers were reallocated to a single limb, which were often then reallocated to two limbs for arithmetic operations even when the result fit into a single limb.)

Combinatorics

  • ASCII art output for Dynkin diagrams (Dan Bump) -- Support for ASCII art representation of Dynkin diagrams of a finite Cartan type. Here are some examples:

    sage: DynkinDiagram("E6")
    
            O 2
            |
            |
    O---O---O---O---O
    1   3   4   5   6   
    E6
    sage: DynkinDiagram(['E',6,1])
    
            O 0
            |
            |
            O 2
            |
            |
    O---O---O---O---O
    1   3   4   5   6
    E6~
  • Crystal of letters for type E (Brant Jones, Anne Schilling) -- Support crystal of letters for type E corresponding to the highest weight crystal B(\Lambda_1) and its dual B(\Lambda_6) (using the Sage labeling convention of the Dynkin nodes). Here are some examples:

    sage: C = CrystalOfLetters(['E',6])
    sage: C.list()
    
    [[1],
     [-1, 3],
     [-3, 4],
     [-4, 2, 5],
     [-2, 5],
     [-5, 2, 6],
     [-2, -5, 4, 6],
     [-4, 3, 6],
     [-3, 1, 6],
     [-1, 6],
     [-6, 2],
     [-2, -6, 4],
     [-4, -6, 3, 5],
     [-3, -6, 1, 5],
     [-1, -6, 5],
     [-5, 3],
     [-3, -5, 1, 4],
     [-1, -5, 4],
     [-4, 1, 2],
     [-1, -4, 2, 3],
     [-3, 2],
     [-2, -3, 4],
     [-4, 5],
     [-5, 6],
     [-6],
     [-2, 1],
     [-1, -2, 3]]
    sage: C = CrystalOfLetters(['E',6], element_print_style="compact")
    sage: C.list()
    
    [+, a, b, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q, r, s, t, u, v, w, x, y, z]

Commutative Algebra

  • Improved performance for SR (Martin Albrecht) -- The speed-up gain for SR is up to 6x. The following timing statistics were obtained using the machine sage.math:

    # BEFORE
    
    sage: sr = mq.SR(4, 4, 4, 8, gf2=True, polybori=True, allow_zero_inversions=True)
    sage: %time F,s = sr.polynomial_system()
    CPU times: user 21.65 s, sys: 0.03 s, total: 21.68 s
    Wall time: 21.83 s
    
    
    # AFTER
    
    sage: sr = mq.SR(4, 4, 4, 8, gf2=True, polybori=True, allow_zero_inversions=True)
    sage: %time F,s = sr.polynomial_system()
    CPU times: user 3.61 s, sys: 0.06 s, total: 3.67 s
    Wall time: 3.67 s
  • Symmetric Groebner bases and infinitely generated polynomial rings (Simon King, Mike Hansen) -- The new modules sage/rings/polynomial/infinite_polynomial_element.py and sage/rings/polynomial/infinite_polynomial_ring.py support computation in polynomial rings with a countably infinite number of variables. Here are some examples for working with these new modules:

    sage: from sage.rings.polynomial.infinite_polynomial_element import InfinitePolynomial
    sage: X.<x> = InfinitePolynomialRing(QQ)
    sage: a = InfinitePolynomial(X, "(x1 + x2)^2"); a
    x2^2 + 2*x2*x1 + x1^2
    sage: p = a.polynomial()
    sage: b = InfinitePolynomial(X, a.polynomial())
    sage: a == b
    True
    sage: InfinitePolynomial(X, int(1))
    1
    sage: InfinitePolynomial(X, 1)
    1
    sage: Y.<x,y> = InfinitePolynomialRing(GF(2), implementation="sparse")
    sage: InfinitePolynomial(Y, a)
    x2^2 + x1^2
    
    sage: X.<x,y> = InfinitePolynomialRing(QQ, implementation="sparse")
    sage: A.<a,b> = InfinitePolynomialRing(QQ, order="deglex")
    sage: f = x[5] + 2; f
    x5 + 2
    sage: g = 3*y[1]; g
    3*y1
    sage: g._p.parent()
    Univariate Polynomial Ring in y1 over Rational Field
    sage: f2 = a[5] + 2; f2
    a5 + 2
    sage: g2 = 3*b[1]; g2
    3*b1
    sage: A.polynomial_ring()
    Multivariate Polynomial Ring in b5, b4, b3, b2, b1, b0, a5, a4, a3, a2, a1, a0 over Rational Field
    sage: f + g
    3*y1 + x5 + 2
    sage: p = x[10]^2 * (f + g); p
    3*y1*x10^2 + x10^2*x5 + 2*x10^2

    Furthermore, the new module sage/rings/polynomial/symmetric_ideal.py supports ideals of polynomial rings in a countably infinite number of variables that are invariant under variable permutation. Symmetric reduction of infinite polynomials is provided by the new module sage/rings/polynomial/symmetric_reduction.pyx.

Geometry

  • Simplicial complex method for polytopes (Marshall Hampton) -- New method simplicial_complex() in the class Polyhedron of sage/geometry/polyhedra.py for computing the simplicial complex from a triangulation of the polytope. Here's an example:

    sage: p = polytopes.cuboctahedron()
    sage: p.simplicial_complex()
    Simplicial complex with 13 vertices and 20 facets
  • Face lattices and f-vectors for polytopes (Marshall Hampton) -- New methods face_lattice() and f_vector() in the class Polyhedron of sage/geometry/polyhedra.py:

    • face_lattice() -- Returns the face-lattice poset. Elements are tuples of (vertices, facets) which keeps track of both the vertices in each face, and all the facets containing them. This method implements the results from the following paper:

      • V. Kaibel and M.E. Pfetsch. Computing the face lattice of a polytope from its vertex-facet incidences. Computational Geometry, 23(3):281--290, 2002.
    • f_vector() -- Returns the f-vector of a polytope as a list.

    Here are some examples:
    sage: c5_10 = Polyhedron(vertices = [[i,i^2,i^3,i^4,i^5] for i in xrange(1,11)]) 
    sage: c5_10_fl = c5_10.face_lattice()
    sage: [len(x) for x in c5_10_fl.level_sets()]
    [1, 10, 45, 100, 105, 42, 1]
    sage: p = Polyhedron(vertices = [[1, 2, 3], [1, 3, 2], [2, 1, 3], [2, 3, 1], [3, 1, 2], [3, 2, 1], [0, 0, 0]])
    sage: p.f_vector()
    [1, 7, 12, 7, 1]

Graph Theory

  • Graph colouring (Robert Miller) -- New method coloring() of the class sage.graphs.graph.Graph for obtaining the first (optimal) coloring found on a graph. Here are some examples on using this new method:

    sage: G = Graph("Fooba")
    sage: P = G.coloring()
    sage: G.plot(partition=P)
    sage: H = G.coloring(hex_colors=True)
    sage: G.plot(vertex_colors=H)

graph-colour-1.png

graph-colour-2.png

  • Optimize the construction of large Sage graphs (Radoslav Kirov) -- The construction of large Sage graphs is now up to 19x faster than previously. The following timing statistics were obtained using the machine sage.math:
    # BEFORE
    
    sage: D = {}
    sage: for i in xrange(10^3):
    ....:     D[i] = [i+1, i-1]
    ....:     
    sage: timeit("g = Graph(D)")
    5 loops, best of 3: 1.02 s per loop
    
    
    # AFTER
    
    sage: D = {}
    sage: for i in xrange(10^3):
    ....:     D[i] = [i+1, i-1]
    ....:     
    sage: timeit("g = Graph(D)")
    5 loops, best of 3: 51.2 ms per loop
  • Generate size n trees in linear time (Ryan Dingman) -- The speed-up can be up to 3400x. However, the efficiency gain is greater as n becomes larger. The following timing statistics were produced using the machine sage.math:

    # BEFORE
    
    sage: %time L = list(graphs.trees(2))
    CPU times: user 0.13 s, sys: 0.02 s, total: 0.15 s
    Wall time: 0.18 s
    sage: %time L = list(graphs.trees(4))
    CPU times: user 0.02 s, sys: 0.00 s, total: 0.02 s
    Wall time: 0.02 s
    sage: %time L = list(graphs.trees(6))
    CPU times: user 0.08 s, sys: 0.00 s, total: 0.08 s
    Wall time: 0.07 s
    sage: %time L = list(graphs.trees(8))
    CPU times: user 0.59 s, sys: 0.00 s, total: 0.59 s
    Wall time: 0.60 s
    sage: %time L = list(graphs.trees(10))
    CPU times: user 34.48 s, sys: 0.02 s, total: 34.50 s
    Wall time: 34.51 s
    
    
    # AFTER
    sage: %time L = list(graphs.trees(2))
    CPU times: user 0.11 s, sys: 0.02 s, total: 0.13 s
    Wall time: 0.15 s
    sage: %time L = list(graphs.trees(4))
    CPU times: user 0.01 s, sys: 0.00 s, total: 0.01 s
    Wall time: 0.00 s
    sage: %time L = list(graphs.trees(6))
    CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s
    Wall time: 0.00 s
    sage: %time L = list(graphs.trees(8))
    CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s
    Wall time: 0.00 s
    sage: %time L = list(graphs.trees(10))
    CPU times: user 0.01 s, sys: 0.00 s, total: 0.01 s
    Wall time: 0.01 s
    sage: %time L = list(graphs.trees(12))
    CPU times: user 0.06 s, sys: 0.00 s, total: 0.06 s
    Wall time: 0.05 s
    sage: %time L = list(graphs.trees(14))
    CPU times: user 0.51 s, sys: 0.01 s, total: 0.52 s
    Wall time: 0.52 s

Graphics

  • Implicit Surfaces (Bill Cauchois, Carl Witty) -- New function implicit_plot3d for plotting level sets of 3-D functions. The documentation contains many examples. Here's a sphere contained inside a tube-like sphere:

    sage: x, y, z = var("x, y, z")
    sage: T = 1.61803398875
    sage: p = 2 - (cos(x + T*y) + cos(x - T*y) + cos(y + T*z) + cos(y - T*z) + cos(z - T*x) + cos(z + T*x))
    sage: r = 4.77
    sage: implicit_plot3d(p, (-r, r), (-r, r), (-r, r), plot_points=40, zoom=1.2).show()

sphere-inside-tube.png

  • Here's a Klein bottle:
    sage: x, y, z = var("x, y, z")
    sage: implicit_plot3d((x^2+y^2+z^2+2*y-1)*((x^2+y^2+z^2-2*y-1)^2-8*z^2)+16*x*z*(x^2+y^2+z^2-2*y-1), (x, -3, 3), (y, -3.1, 3.1), (z, -4, 4), zoom=1.2)

klein-bottle.png

  • This example shows something resembling a water droplet:
    sage: x, y, z = var("x, y, z")
    sage: implicit_plot3d(x^2 +y^2 -(1-z)*z^2, (x, -1.5, 1.5), (y, -1.5, 1.5), (z, -1, 1), zoom=1.2)

water-droplet.png

  • Fixed bug in rendering 2D polytopes embedded in 3D (Arnauld Bergeron, Bill Cauchois, Marshall Hampton).

Group Theory

  • Improved efficiency of is_subgroup (Simon King) -- Testing whether a group is a subgroup of another group is now up to 2x faster than previously. The following timing statistics were obtained using the machine sage.math:

    # BEFORE
    
    sage: G = SymmetricGroup(7)
    sage: H = SymmetricGroup(6)
    sage: %time H.is_subgroup(G)
    CPU times: user 4.12 s, sys: 0.53 s, total: 4.65 s
    Wall time: 5.51 s
    True
    sage: %timeit H.is_subgroup(G)
    10000 loops, best of 3: 118 µs per loop
    
    
    # AFTER
    
    sage: G = SymmetricGroup(7)
    sage: H = SymmetricGroup(6)
    sage: %time H.is_subgroup(G)
    CPU times: user 0.00 s, sys: 0.00 s, total: 0.00 s
    Wall time: 0.00 s
    True
    sage: %timeit H.is_subgroup(G)
    10000 loops, best of 3: 56.3 µs per loop

Interfaces

  • Viewing Sage objects with a PDF viewer (Nicolas Thiery) -- Implements the option viewer="pdf" for the command view() so that one can invoke this command in the form view(object, viewer="pdf") in order to view object using a PDF viewer. Typical uses of this new optional argument include:

    • You prefer to use a PDF viewer rather than a DVI viewer.
    • You want to view LaTeX snippets which are not displayed well in DVI viewers (e.g. graphics produced using tikzpicture).
  • Change name of Pari's sum function when imported (Craig Citro) -- When Pari's sum function is imported, it is renamed to pari_sum in order to avoid conflict Python's sum function.

Linear Algebra

  • Improved performance for the generic linear_combination_of_rows and linear_combination_of_columns functions for matrices (William Stein) -- The speed-up for the generic functions linear_combination_of_rows and linear_combination_of_columns is up to 4x. The following timing statistics were obtained using the machine sage.math:

    # BEFORE
    
    sage: A = random_matrix(QQ, 50)
    sage: v = [1..50]
    sage: %timeit A.linear_combination_of_rows(v);
    1000 loops, best of 3: 1.99 ms per loop
    sage: %timeit A.linear_combination_of_columns(v);
    1000 loops, best of 3: 1.97 ms per loop
    
    
    # AFTER
    
    sage: A = random_matrix(QQ, 50)
    sage: v = [1..50]
    sage: %timeit A.linear_combination_of_rows(v);
    1000 loops, best of 3: 436 µs per loop
    sage: %timeit A.linear_combination_of_columns(v);
    1000 loops, best of 3: 457 µs per loop
  • Massively improved performance for 4 x 4 determinants (Tom Boothby) -- The efficiency of computing the determinants of 4 x 4 matrices can range from 16x up to 58,083x faster than previously, depending on the base ring. The following timing statistics were obtained using the machine sage.math:

    # BEFORE
    
    sage: S = MatrixSpace(ZZ, 4)
    sage: M = S.random_element(1, 10^8)
    sage: timeit("M.det(); M._clear_cache()")
    625 loops, best of 3: 53 µs per loop
    sage: M = S.random_element(1, 10^10)
    sage: timeit("M.det(); M._clear_cache()")
    625 loops, best of 3: 54.1 µs per loop
    sage: 
    sage: M = S.random_element(1, 10^200)
    sage: timeit("M.det(); M._clear_cache()")
    5 loops, best of 3: 121 ms per loop
    sage: M = S.random_element(1, 10^300)
    sage: timeit("M.det(); M._clear_cache()")
    5 loops, best of 3: 338 ms per loop
    sage: M = S.random_element(1, 10^1000)
    sage: timeit("M.det(); M._clear_cache()")
    5 loops, best of 3: 9.7 s per loop
    
    
    # AFTER
    
    sage: S = MatrixSpace(ZZ, 4)
    sage: M = S.random_element(1, 10^8)
    sage: timeit("M.det(); M._clear_cache()")
    625 loops, best of 3: 3.17 µs per loop
    sage: M = S.random_element(1, 10^10)
    sage: timeit("M.det(); M._clear_cache()")
    625 loops, best of 3: 3.44 µs per loop
    sage: 
    sage: M = S.random_element(1, 10^200)
    sage: timeit("M.det(); M._clear_cache()")
    625 loops, best of 3: 15.3 µs per loop
    sage: M = S.random_element(1, 10^300)
    sage: timeit("M.det(); M._clear_cache()")
    625 loops, best of 3: 27 µs per loop
    sage: M = S.random_element(1, 10^1000)
    sage: timeit("M.det(); M._clear_cache()")
    625 loops, best of 3: 167 µs per loop
  • Refactor matrix kernels (Rob Beezer) -- The core section of kernel computation for each (specialized) class is now moved into the method right_kernel(). Mostly these would replace kernel() methods that are computing left kernels. A call to kernel() or left_kernel() should arrive at the top of the hierarchy where it would take a transpose and call the (specialized) right_kernel(). So there wouldn't be a change in behavior in routines currently calling kernel() or left_kernel(), and Sage's preference for the left is retained by having the vanilla kernel() give back a left kernel. The speed-up for the computation of left kernels is up to 5% faster, and the computation of right kernels is up to 31% by eliminating paired transposes. The following timing statistics were obtained using sage.math:

    # BEFORE
    
    sage: n = 2000
    sage: entries = [[1/(i+j+1) for i in srange(n)] for j in srange(n)]
    sage: mat = matrix(QQ, entries)
    sage: %time mat.left_kernel();
    CPU times: user 21.92 s, sys: 3.22 s, total: 25.14 s
    Wall time: 25.26 s
    sage: %time mat.right_kernel();
    CPU times: user 23.62 s, sys: 3.32 s, total: 26.94 s
    Wall time: 26.94 s
    
    
    # AFTER
    
    sage: n = 2000
    sage: entries = [[1/(i+j+1) for i in srange(n)] for j in srange(n)]
    sage: mat = matrix(QQ, entries)
    sage: %time mat.left_kernel();
    CPU times: user 20.87 s, sys: 2.94 s, total: 23.81 s
    Wall time: 23.89 s
    sage: %time mat.right_kernel();
    CPU times: user 18.43 s, sys: 0.00 s, total: 18.43 s
    Wall time: 18.43 s
  • Cholesky decomposition for matrices other than RDF (Nick Alexander) -- The method cholesky() of the class Matrix_double_dense in sage/matrix/matrix_double_dense.pyx is now deprecated and will be removed in a future release. Users are advised to use cholesky_decomposition() instead. The new method cholesky_decomposition() in the class Matrix of sage/matrix/matrix2.pyx can be used to compute the Cholesky decomposition of matrices with entries over arbitrary precision real and complex fields. Here's an example over the real double field:

    sage: r = matrix(RDF, 5, 5, [ 0,0,0,0,1, 1,1,1,1,1, 16,8,4,2,1, 81,27,9,3,1, 256,64,16,4,1 ])
    sage: m = r * r.transpose(); m
    
    [    1.0     1.0     1.0     1.0     1.0]
    [    1.0     5.0    31.0   121.0   341.0]
    [    1.0    31.0   341.0  1555.0  4681.0]
    [    1.0   121.0  1555.0  7381.0 22621.0]
    [    1.0   341.0  4681.0 22621.0 69905.0]
    sage: L = m.cholesky_decomposition(); L
    
    [          1.0           0.0           0.0           0.0           0.0]
    [          1.0           2.0           0.0           0.0           0.0]
    [          1.0          15.0 10.7238052948           0.0           0.0]
    [          1.0          60.0 60.9858144589 7.79297342371           0.0]
    [          1.0         170.0 198.623524155 39.3665667796 1.72309958068]
    sage: L.parent()
    Full MatrixSpace of 5 by 5 dense matrices over Real Double Field
    sage: L*L.transpose()
    
    [    1.0     1.0     1.0     1.0     1.0]
    [    1.0     5.0    31.0   121.0   341.0]
    [    1.0    31.0   341.0  1555.0  4681.0]
    [    1.0   121.0  1555.0  7381.0 22621.0]
    [    1.0   341.0  4681.0 22621.0 69905.0]
    sage: ( L*L.transpose() - m ).norm(1) < 2^-30
    True
    Here's an example over a higher precision real field:
    sage: r = matrix(RealField(100), 5, 5, [ 0,0,0,0,1, 1,1,1,1,1, 16,8,4,2,1, 81,27,9,3,1, 256,64,16,4,1 ])
    sage: m = r * r.transpose()
    sage: L = m.cholesky_decomposition()
    sage: L.parent()
    Full MatrixSpace of 5 by 5 dense matrices over Real Field with 100 bits of precision
    sage: ( L*L.transpose() - m ).norm(1) < 2^-50
    True
    Here's a Hermitian example:
    sage: r = matrix(CDF, 2, 2, [ 1, -2*I, 2*I, 6 ]); r
    
    [   1.0 -2.0*I]
    [ 2.0*I    6.0]
    sage: r.eigenvalues()
    [0.298437881284, 6.70156211872]
    sage: ( r - r.conjugate().transpose() ).norm(1) < 1e-30
    True
    sage: L = r.cholesky_decomposition(); L
    
    [          1.0             0]
    [        2.0*I 1.41421356237]
    sage: ( r - L*L.conjugate().transpose() ).norm(1) < 1e-30
    True
    sage: L.parent()
    Full MatrixSpace of 2 by 2 dense matrices over Complex Double Field
    Note that the implementation uses a standard recursion that is not known to be numerically stable. Furthermore, it is potentially expensive to ensure that the input is positive definite. Therefore this is not checked and it is possible that the output matrix is not a valid Cholesky decomposition of a matrix.
  • Make symbolic matrices use pynac symbolics (Mike Hansen, Jason Grout) -- Using Pynac symbolics, calculating the determinant of a symbolic matrix can be up to 2500x faster than previously. The following timing statistics were obtained using the machine sage.math:
    # BEFORE
    
    sage: x00, x01, x10, x11 = var("x00, x01, x10, x11")
    sage: a = matrix(2, [[x00,x01], [x10,x11]])
    sage: %timeit a.det()
    100 loops, best of 3: 8.29 ms per loop
    
    
    # AFTER
    
    sage: x00, x01, x10, x11 = var("x00, x01, x10, x11")
    sage: a = matrix(2, [[x00,x01], [x10,x11]])
    sage: %timeit a.det()
    100000 loops, best of 3: 3.2 µs per loop

Miscellaneous

  • Allow use of pdflatex instead of latex (John Palmieri) -- One can now use pdflatex instead of latex in two different ways:

    • Use a %pdflatex cell in a notebook; or

    • Call latex.pdflatex(True)

    after which any use of latex (in a %latex cell or using the view command) will use pdflatex. One visually appealing aspect of this is that if you have the most recent version of pgf installed, as well as the tkz-graph package, you can produce images like the following:

pgf-graph.png

Modular Forms

  • Action of Hecke operators on Gamma_1(N) modular forms (David Loeffler) -- Here's an example:

    sage: ModularForms(Gamma1(11), 2).hecke_matrix(2)
    
    [       -2         0         0         0         0         0         0         0         0         0]
    [        0      -381         0      -360         0       120     -4680     -6528     -1584      7752]
    [        0      -190         0      -180         0        60     -2333     -3262      -789      3887]
    [        0   -634/11         1   -576/11         0    170/11  -7642/11 -10766/11      -231  12555/11]
    [        0     98/11         0     78/11         0    -26/11   1157/11   1707/11        30  -1959/11]
    [        0    290/11         0    271/11         0    -50/11   3490/11   5019/11        99  -5694/11]
    [        0    230/11         0    210/11         0    -70/11   2807/11   3940/11        84  -4632/11]
    [        0    122/11         0    120/11         1    -40/11   1505/11   2088/11        48  -2463/11]
    [        0     42/11         0     46/11         0    -30/11    554/11    708/11        21   -970/11]
    [        0     10/11         0     12/11         0      7/11    123/11    145/11         7   -177/11]
  • Slopes of U_p operator acting on a space of overconvergent modular forms (Lloyd Kilford) -- New method slopes of the class OverconvergentModularFormsSpace in sage/modular/overconvergent/genus0.py for computing the slopes of the U_p operator acting on a space of overconvergent modular forms. Here are some examples of using this new method:

    sage: OverconvergentModularForms(5,2,1/3,base_ring=Qp(5),prec=100).slopes(5)
    [0, 2, 5, 6, 9]
    sage: OverconvergentModularForms(2,1,1/3,char=DirichletGroup(4,QQ).0).slopes(5)
    [0, 2, 4, 6, 8]

Number Theory

  • Function multiplicative_generator for Z/NZ (David Loeffler) -- This adds support for the case where n is twice a power of an odd prime. Also, the new method subgroups() is added to the class AbelianGroup_class in sage/groups/abelian_gps/abelian_group.py. The method computes all the subgroups of a finite abelian group. Here's an example on working with the new method subgroups():

    sage: AbelianGroup([2,3]).subgroups()
    
    [Multiplicative Abelian Group isomorphic to C2 x C3, which is the subgroup of
    Multiplicative Abelian Group isomorphic to C2 x C3
    generated by [f0*f1^2],
     Multiplicative Abelian Group isomorphic to C2, which is the subgroup of
    Multiplicative Abelian Group isomorphic to C2 x C3
    generated by [f0],
     Multiplicative Abelian Group isomorphic to C3, which is the subgroup of
    Multiplicative Abelian Group isomorphic to C2 x C3
    generated by [f1],
     Trivial Abelian Group, which is the subgroup of
    Multiplicative Abelian Group isomorphic to C2 x C3
    generated by []]
    sage: 
    sage: len(AbelianGroup([2,3,8]).subgroups())
    22
    sage: len(AbelianGroup([2,4,8]).subgroups())
    81
  • Speed-up relativization of number fields (Nick Alexander) -- The efficiency gain of relativizing a number field can be up to 1700x. Furthermore, the rewrite of the method relativize() allows for relativization over large number fields. The following timing statistics were obtained using the machine sage.math:

    # BEFORE
    
    sage: x = ZZ['x'].0
    sage: f1 = x^6 - x^5 + 3*x^4 - x^3 + 2*x + 1
    sage: f2 = x^6 - 3*x^4 - 3*x^3 + x^2 - 5*x + 128
    sage: Cs = NumberField(f1, 'a').composite_fields(NumberField(f2, 'b'),'c')
    sage: Cs[0]
    Number Field in c0 with defining polynomial x^36 + 6*x^35 + 15*x^34 - 4*x^33 - 111*x^32 - 274*x^31 + 582*x^30 + 4324*x^29 - 3789*x^28 - 54668*x^27 + 32320*x^26 + 856085*x^25 + 1298637*x^24 - 2417756*x^23 - 13665500*x^22 - 20951687*x^21 + 59477645*x^20 + 87168628*x^19 - 22215303*x^18 + 1087742856*x^17 + 818805906*x^16 - 6530512252*x^15 + 2925074857*x^14 + 34364936564*x^13 - 33537062600*x^12 - 118414559201*x^11 + 163183807491*x^10 + 260157742832*x^9 - 605914536*x^8 + 913639172503*x^7 + 2281698823419*x^6 - 2611018483575*x^5 - 9050720943737*x^4 - 6039450304329*x^3 + 11443636068924*x^2 + 6013419415005*x + 2666558286895
    sage: %time Cs[0].relativize(Cs[0].subfields(6)[0][1], 'z')
    CPU times: user 4899.67 s, sys: 0.17 s, total: 4899.84 s
    Wall time: 4900.01 s
    Number Field in z0 with defining polynomial x^6 + (-10039053522/7502233115183347*c00^5 + 10877293823487/15004466230366694*c00^4 - 2360331495431769/15004466230366694*c00^3 + 128474733039101100/7502233115183347*c00^2 - 14065562373889051803/15004466230366694*c00 + 310508311372489830621/15004466230366694)*x^5 + (1684161096735/60017864921466776*c00^5 - 482099403293805/30008932460733388*c00^4 + 220599517382473455/60017864921466776*c00^3 - 25269626581733395995/60017864921466776*c00^2 + 727078349789696789565/30008932460733388*c00 - 33787826577687321855963/60017864921466776)*x^4 + (78399653403/15004466230366694*c00^5 - 20828815654522/7502233115183347*c00^4 + 8825176716960093/15004466230366694*c00^3 - 933213426139820735/15004466230366694*c00^2 + 24657212906331074698/7502233115183347*c00 - 1041516656628768048179/15004466230366694)*x^3 + (-801387260499/30008932460733388*c00^5 + 115968827806665/7502233115183347*c00^4 - 107159067879439581/30008932460733388*c00^3 + 12379376610271322667/30008932460733388*c00^2 - 179457468744004910316/7502233115183347*c00 + 16802522081228250322201/30008932460733388)*x^2 + (-1558518536591/60017864921466776*c00^5 + 444804027025213/30008932460733388*c00^4 - 202861597209142591/60017864921466776*c00^3 + 23151366405463607211/60017864921466776*c00^2 - 663271312652093373749/30008932460733388*c00 + 30664716263354572251675/60017864921466776)*x + c00 over its base field
    
    
    #AFTER
    
    sage: x = ZZ['x'].0
    sage: f1 = x^6 - x^5 + 3*x^4 - x^3 + 2*x + 1
    sage: f2 = x^6 - 3*x^4 - 3*x^3 + x^2 - 5*x + 128
    sage: Cs = NumberField(f1, 'a').composite_fields(NumberField(f2, 'b'),'c')
    sage: Cs[0]
    Number Field in c0 with defining polynomial x^36 + 6*x^35 + 15*x^34 - 4*x^33 - 111*x^32 - 274*x^31 + 582*x^30 + 4324*x^29 - 3789*x^28 - 54668*x^27 + 32320*x^26 + 856085*x^25 + 1298637*x^24 - 2417756*x^23 - 13665500*x^22 - 20951687*x^21 + 59477645*x^20 + 87168628*x^19 - 22215303*x^18 + 1087742856*x^17 + 818805906*x^16 - 6530512252*x^15 + 2925074857*x^14 + 34364936564*x^13 - 33537062600*x^12 - 118414559201*x^11 + 163183807491*x^10 + 260157742832*x^9 - 605914536*x^8 + 913639172503*x^7 + 2281698823419*x^6 - 2611018483575*x^5 - 9050720943737*x^4 - 6039450304329*x^3 + 11443636068924*x^2 + 6013419415005*x + 2666558286895
    sage: %time Cs[0].relativize(Cs[0].subfields(6)[0][1], 'z')
    CPU times: user 2.69 s, sys: 0.04 s, total: 2.73 s
    Wall time: 2.88 s
    Number Field in z0 with defining polynomial x^6 + (-10039053522/7502233115183347*c00^5 + 10877293823487/15004466230366694*c00^4 - 2360331495431769/15004466230366694*c00^3 + 128474733039101100/7502233115183347*c00^2 - 14065562373889051803/15004466230366694*c00 + 310508311372489830621/15004466230366694)*x^5 + (1684161096735/60017864921466776*c00^5 - 482099403293805/30008932460733388*c00^4 + 220599517382473455/60017864921466776*c00^3 - 25269626581733395995/60017864921466776*c00^2 + 727078349789696789565/30008932460733388*c00 - 33787826577687321855963/60017864921466776)*x^4 + (78399653403/15004466230366694*c00^5 - 20828815654522/7502233115183347*c00^4 + 8825176716960093/15004466230366694*c00^3 - 933213426139820735/15004466230366694*c00^2 + 24657212906331074698/7502233115183347*c00 - 1041516656628768048179/15004466230366694)*x^3 + (-801387260499/30008932460733388*c00^5 + 115968827806665/7502233115183347*c00^4 - 107159067879439581/30008932460733388*c00^3 + 12379376610271322667/30008932460733388*c00^2 - 179457468744004910316/7502233115183347*c00 + 16802522081228250322201/30008932460733388)*x^2 + (-1558518536591/60017864921466776*c00^5 + 444804027025213/30008932460733388*c00^4 - 202861597209142591/60017864921466776*c00^3 + 23151366405463607211/60017864921466776*c00^2 - 663271312652093373749/30008932460733388*c00 + 30664716263354572251675/60017864921466776)*x + c00 over its base field
  • Improved efficiency of elliptic curve torsion computation (John Cremona) -- The speed-up of computing elliptic curve torsion can be up to 12%. The following timing statistics were obtained using the machine sage.math:
    # BEFORE
    
    sage: F.<z> = CyclotomicField(21)
    sage: E = EllipticCurve([2,-z^7,-z^7,0,0])
    sage: time E._p_primary_torsion_basis(7);
    CPU times: user 9.87 s, sys: 0.07 s, total: 9.94 s
    Wall time: 9.95 s
    
    
    # AFTER
    
    sage: F.<z> = CyclotomicField(21)
    sage: E = EllipticCurve([2,-z^7,-z^7,0,0])
    sage: time E._p_primary_torsion_basis(7,2);
    CPU times: user 8.56 s, sys: 0.11 s, total: 8.67 s
    Wall time: 8.67 s
  • New method odd_degree_model() for hyperelliptic curves (Nick Alexander) -- The new method odd_degree_model() in the class HyperellipticCurve_generic of sage/schemes/hyperelliptic_curves/hyperelliptic_generic.py computes an odd degree model of a hyperelliptic curve. Here are some examples:

    sage: x = QQ['x'].gen()
    sage: H = HyperellipticCurve((x^2 + 2)*(x^2 + 3)*(x^2 + 5))
    sage: K2 = QuadraticField(-2, 'a')
    sage: H.change_ring(K2).odd_degree_model()
    Hyperelliptic Curve over Number Field in a with defining polynomial x^2 + 2 defined by y^2 = 6*a*x^5 - 29*x^4 - 20*x^2 + 6*a*x + 1
    sage: K3 = QuadraticField(-3, 'b')
    sage: H.change_ring(QuadraticField(-3, 'b')).odd_degree_model()
    Hyperelliptic Curve over Number Field in b with defining polynomial x^2 + 3 defined by y^2 = -4*b*x^5 - 14*x^4 - 20*b*x^3 - 35*x^2 + 6*b*x + 1
  • Rational arguments in kronecker_symbol() and legendre_symbol() (Gonzalo Tornaria) -- The functions kronecker_symbol() and legendre_symbol() in sage/rings/arith.py now support rational arguments. Here are some examples for working with rational arguments to these functions:

    sage: kronecker(2/3,5)
    1
    sage: legendre_symbol(2/3,7)
    -1

Packages

  • Upgrade fpLLL to latest upstream release version 3.0.12 (Michael Abshoff).

  • Update the NTL spkg to version ntl-5.4.2.p7 (Michael Abshoff).

  • Downgrade the NetworkX spkg to version 0.36 (William Stein) -- The previous networkx-0.99.p0.spkg spkg contained both NetworkX 0.36, which Sage was using, and NetworkX 0.99. When installing networkx-0.99.p0.spkg, only version 0.36 would be installed. This wastes disk space, and it confuses users. The current NetworkX package that's shipped by Sage only contains version 0.36.

  • Upgrade Symmetrica to latest upstream release version 2.0 (Michael Abshoff).

  • Split off the Boost library from polybori.spkg (Michael Abshoff) -- Boost version 1.34.1 is now contained within its own spkg.

  • Switch from Clisp version 2.47 to ECL version 9.4.1 (Michael Abshoff).

  • Upgrade MPIR to latest upstream release version 1.1.2 (William Stein).

  • Upgrade Python to latest 2.5.x upstream release version 2.5.4 (Michael Abshoff, Mike Hansen).

P-adics

  • Norm function in the p-adic ring (David Roe) -- New function abs() to calculate the p-adic absolute value. This is normalized so that the absolute value of p is 1/p. This should be distinguished from the function norm(), which computes the norm of a p-adic element over a ground ring. Here are some examples of using the new function abs():

    sage: a = Qp(5)(15); a.abs()
    1/5
    sage: a.abs(53)
    0.200000000000000
    sage: R = Zp(5, 5)
    sage: S.<x> = ZZ[]
    sage: f = x^5 + 75*x^3 - 15*x^2 +125*x - 5
    sage: W.<w> = R.ext(f)
    sage: w.abs()
    0.724779663677696

Quadratic Forms

  • Major upgrade to the QuadraticForm local density routines (Jon Hanke) -- A complete rewrite of local densities routines, following a consistent interface (and algorithms) as described in this paper.

Symbolics

  • Update Pynac to version 0.1.7 (Burcin Erocal).

  • Switch from Maxima to Pynac for core symbolic manipulation (Mike Hansen, William Stein, Carl Witty, Robert Bradshaw).

Topology

  • Random simplicial complexes (John Palmieri) -- New method RandomComplex() in the module sage/homology/examples.py for producing a random d-dimensional simplicial complex on n vertices. Here's an example:

    sage: simplicial_complexes.RandomComplex(6,12)
    Simplicial complex with vertex set (0, 1, 2, 3, 4, 5, 6, 7) and facets {(0, 1, 2, 3, 4, 5, 6, 7)}

ReleaseTours/sage-4.0 (last edited 2009-12-26 14:59:17 by Minh Nguyen)